Strange noise started today please help

[cyroute]

Well i didnt think i would have to post again so quickly. Have problem when i run the bike a little and then come to stop its starts making a whining noise and starts to almost pull a little but not much then stalls :no:. I made a video of the noise its making here is a link . by the way this is a new bike stock.

YouTube - ‪Bad noise‬‏

Thanks.

Joe

 

[agent001]

Sounds like a clutch issue to me.
Pop the cover, pull the clutch and give it a good eyeballing. Probably not disengaging due to worn bushing, lots of dirt stuck on bushing, lack of lube, improperly installed etc etc.

 

[cyroute]

????

Sounds like a clutch issue to me.
Pop the cover, pull the clutch and give it a good eyeballing. Probably not disengaging due to worn bushing, lots of dirt stuck on bushing, lack of lube, improperly installed etc etc.

ok im a new to all this where is the clutch? This is brand new only has about 30-45min ride time into it should i just take it back and swap it i have 30 days

 

[cudaman]

Clutch bushing needs a few drops of oil.

 

[cyroute]

Clutch bushing needs a few drops of oil.

ok where are the clutch bushings how do i get to them and what type of oil. you are talking to a newb but i have lots of tools and not afraid to get my hands dirty.

 

[Strigoi]

the search function is your friend when it comes to stuff like this.

 

[cyroute]

ok found a good post on the clutch oil instructions but there is a bolt on the end is thing reverse thread or normal it doesnt seem to want to come off.

 

[cyroute]

Thanks for all your help! I took the clutch apart and lub'd the bushings. Everything seems to be working fine now.

Joe

 

[jrzmac]

ok im a new to all this where is the clutch?

:anon.sml:

 

[padirtbike353]

had the same problem. it was a new bike and it started to whine and then stall. i pulled it apart cleaned it and now its all good.