Tecumseh HM-80 starter motor delete.

[Sprocket86]

I have decided to remove the E start components from my Heald Super Bronc for the time being. Starts with one pull anyway.

Did Tecumseh make a fan shroud bump out block off tin for the HM series of engines? I would hate to get a rock or debris stuck in there.

 

[chrisr]

Here you go...

https://www.ebay.com/itm/2837489505...UosxHKaRvqyvarRv0ichBF+gs=|tkp:Bk9SR4i8iZrBYQ

 

[RobertC]

@Sprocket86 with the electric start on a vt-8 being somewhat out of the ordinary (IMO)...why have you chosen to remove it ?

 

[Sprocket86]

@Sprocket86 with the electric start on a vt-8 being somewhat out of the ordinary (IMO)...why have you chosen to remove it ?

The wiring needs to be completely replaced. I do like that it’s original to the bike. I only plan to temporarily remove the E start parts until I plan on getting it all set up correctly.

I figure why lug around the starter motor if not needed.
Did the E start Healds have an external regulator/rectifier on the HM-80 and did the lights run directly off the battery?

 

[Sprocket86]

Here you go...

https://www.ebay.com/itm/283748950560?epid=27018449499&hash=item4210c16220:g:6P4AAOSwGj9eI7pH&amdata=enc:AQAHAAAAoGAEM2TbadM+9+ShiAYYgqvuVwUSgOl3UCAFZ2tAf27nBZ1O+hsmmEl1aCSnl98rDsQyWkHd0NVMzeeYxRIcBFqVNC8s4CON149f+rtqgHEiUFPt4b2AOF+Pcs+awrrD1KoyO3bMGDlyKATNo5POcyY4ckfOSLYjf87CyoE+WXz2lcdVBYFB4uIvX9UZusUosxHKaRvqyvarRv0ichBF+gs=|tkp:Bk9SR4i8iZrBYQ

Thank you.