Tecumseh HS40 oversize piston and correct choke lever etc…

[markus]

.010 oversize piston assembly for the HS40 engines. $125 plus the ride



Nos correct 1971-up choke levers made to fit with headers and bolt on exhausts. $30 each shipped



These can fit with some alterations to the China carbs for HS and should be direct bolt on to the H50 based Chinese unit that BWM sells for HS engines.


I also have a setup and ready to run NOS tec carb for HS40 as well $115 shipped SOLD…..will see if I can make up more, thank you.

 

[gwoods27]

Interested in the .10 over piston
PM me

 

[markus]

Interested in the .10 over piston
PM me

Sent pm with info



Carb assembly has been SOLD!!!
Thanks

 

[markus]

Carb assembly SOLD
2 piston assemblies SOLD

I have some Choke levers left right now and I can spare one more piston assembly if you need one and still have a couple for customer engine rebuilds if needed (I can bore engine blocks etc...if service is needed). Thank you!

 

[hermans13]

Markus, Can you machine a 5HP Tecumseh snow blower crankshaft down to 3/4" dia. with 3/16" keyway?

 

[markus]

Markus, Can you machine a 5HP Tecumseh snow blower crankshaft down to 3/4" dia. with 3/16" keyway?

No sorry

 

[markus]

All extra HS40 Piston assemblies have been SOLD!!!!! Thank you

Only parts listed above available at this time are HS40/50 choke levers as I have a bunch of them.

Thank you

 

[markus]

All choke levers have now been SOLD!!!!! Thank you everyone!!!