Tillostin 212cc won’t start after chain fell off

I

Imnofun

New Member
#1
#1
Engine won’t start after my chain fell off and the engine was redlined. I pull the pull string and it won’t even attempt to start anymore. Ran fine before. Any help would be appreciated
 
fhpe77

fhpe77

Active Member
#2
#2
I had this happen to my modded Predator 212 hemi. Managed to float the valves even with 26lb springs. This resulted in a push rod losing contact with the rocker arm and moving sideways, thus no longer allowing the intake valve to operate. It also resulted in a bent intake push rod. Pull your valve cover and check it out.

-Ray
 
I

Imnofun

New Member
#3
#3
fhpe77 said:
I had this happen to my modded Predator 212 hemi. Managed to float the valves even with 26lb springs. This resulted in a push rod losing contact with the rocker arm and moving sideways, thus no longer allowing the intake valve to operate. It also resulted in a bent intake push rod. Pull your valve cover and check it out.

-Ray
Click to expand...
thank you for the info. I will begin removing valve cover.
 
You must log in or register to reply here.
Top