Vintage Tote Gote 760

#12
I seen this bike in person at a local flea market last summer.. He ain’t kidding when he says it’s been outside for decades.. it was rough to put it nice.. this should be an awesome build!
 
#13
Here is the engine I plan on using, this guy was planb from last years build... Nice runner I just pulled it apart and checked it over, and rebuilt the Carb. changed out the air cleaner for a 7 hp model and done! 20190101_095945.jpg
 

Davis

Well-Known Member
#15
That is a nice motor what does the output shaft look like. The climb away clutch needs to be tight to the motor. If it has a collar you either have to pull the crank and machine it down or cut the motor plate and move the motor over.
 
#16
That is a nice motor what does the output shaft look like. The climb away clutch needs to be tight to the motor. If it has a collar you either have to pull the crank and machine it down or cut the motor plate and move the motor over.
I plan on making a custom back plate for the clutch that will allow the complete unit to slide in tight...
 
Top