Wanted .10" over HS40 rings for piston 32604

[gammatg]

Looking for a set of .10" rings for piston #32604. I am not sure of the part # for these.

 

[Skipp]

Im
Pretty sure your numbers going to be 34855....

 

[creia]

Skipp has provided you with the correct part #. If you cannot locate any (likely) you "MIGHT" be able to use Tecumseh Part # 33316 which is the .010" ring set for the H50 and H60 which have the exact same bore size as your HS40 which is 2.625". I have a set of the 33316 if you are interested. Also, here is a 33316 set for sale on eBay.
Michael
http://rover.ebay.com/rover/1/711-5...0001&campid=5335845805&icep_item=124395767849

 

[gammatg]

I appreciate the information gentleman. Thank you!

 

[ELT]

I was recently looking for .020 rings for an hs40 engine. I discovered that a farmall cub tractor with a c60 engine has the same bore and rings are available in .020. The compression rings are the same width as tecumseh but the oil ring is wider. Maybe this will help someone looking for rings.