Looking for a Briggs & Stratton shroud like the one pictured below.
The shroud was usually found on models 6B-S, 6B-SF and 6B-SFB motors.
The shroud is very distinctive and can be distinguished from others by:
Five horizontal bars at the top.
B
- embossed at 9 o’clock.
S
Recoil starter with the pull at 8 o’clock.
No model, type or serial number stampings.
No identification tags or holes from identification tags.
Measures approximately 5” across at the top and the overall length is about 10” – 11”.
Thanks!
The shroud was usually found on models 6B-S, 6B-SF and 6B-SFB motors.
The shroud is very distinctive and can be distinguished from others by:
Five horizontal bars at the top.
B
- embossed at 9 o’clock.
S
Recoil starter with the pull at 8 o’clock.
No model, type or serial number stampings.
No identification tags or holes from identification tags.
Measures approximately 5” across at the top and the overall length is about 10” – 11”.
Thanks!