Wanted to show off my Coleman CT200U Hot Rod Mini Bike, Hemi on Meth with TC 30 serie

#1
My Coleman CT200U, mods include:
Hemi Predator with ARC billet flywheel and +0.020 rod. F275 cam, ported head, 26lb springs, SS valves. Bored carb. jetted for Methanol.
Chinese Series 30 TC, genuine comet belt, silver/blue driver springs, yellow driven spring.

[video=youtube_share;6_rmr8lNLk8]https://youtu.be/6_rmr8lNLk8[/video]
 
#3
sounds great and hauls hehe:thumbsup:mine is stock,shorty pipe w hotdog muffler and filter i just street ride mine
 
Last edited:
#7
Thanks, it lots of fun, but is capable of a lot more.
I need to up the compression and advance the timing more. Currently the TC is not letting me get into the power band of the cam.
I need to figure out a way to prevent the driven pulley from going into high until about 6500 to 7000 rpm.
 

SAS289

Well-Known Member
#9
One member recommended a 7 inch driven because it does not have the OD function of the 6 inch driven. I think 7 to 1 gearing was mentioned because of the tall Coleman tire.
 
Top