Wheel id

#1
I tore down a powerdyne mini bike today to start building. I can’t tell if these are correct wheels or not, they are different from advertisements and other powerdynes that I’m finding. I like them though, they are built differently then any other mini bike wheel I have run into. The wheels also have 1/2” bearings and the bike matches. D81350CE-4DEA-42B5-89A1-61F6D3187AD7.jpeg 10024017-03D0-439C-99EA-38FBCEF6870D.jpeg 5520EEAE-70ED-4AB3-B523-948F9B52A8D9.jpeg 4FB041BA-0230-4019-9968-48545638A5CD.jpeg
 

markus

Well-Known Member
#2
Yes they are what powerdynes used, The PD's used 1/2 axles and headtubes.

I had a set on this junker I bought and cut up

The brake is the one on the top for most bikes, the assemblies were made by "Rong Shin" The sprocket might be stamped. They use the same brake shoes as a honda Z50/QA50 etc... The black one on the bottom is a Honda, and the silver one is the Victor copies that Barris and others used for comarasion.

 
#3
Thanks Markus, i couldn’t tell for sure if they were or not. I hope I have a brake in the back shed, it will be nice to use the drum. The sprocket set up is different then I’ve seen, I couldn’t figure out how to take it apart at first lol. Turned out really simple and well made in my opinion. I really like the engine plate on this bike too, it’s raised and on an angle, I haven’t seen a bike like that either
 
Top