WTB. Small block Tecumseh oil drain plug.

[manchester1]

Looking for a "flat" oil drain plug for Tecumseh. H25, H30, HS40, I believe all the same. I will swap you a NOS H50 plug or pay pal. Or if you have a part number that I can't seem to find. Thanks for your help.

 

[BigBoyToys]

Looking for a "flat" oil drain plug for Tecumseh. H25, H30, HS40, I believe all the same. I will swap you View attachment 297861 a NOS H50 plug or pay pal. Or if you have a part number that I can't seem to find. Thanks for your help.

I will ask Carmine to take a look when he gets home.

 

[manchester1]

I will ask Carmine to take a look when he gets home.

Thank you.

 

[Skipp]

I have a couple of Allen’s, this style if all else fails..

 

[JB_Books]

They are 1/4" NPT pipe thread, probably pick 1 up at home depot, Lowe's, ACE hardware

 

[manchester1]

I'll have to look into that.

 

[cfh]

any hardware store sells these. in the plumbing section. 1/4" npt plugs. they are all of about $2 each, if that.

 

[manchester1]

Thank you

 

[creia]

any hardware store sells these. in the plumbing section. 1/4" npt plugs. they are all of about $2 each, if that.

100% correct. ^^^ My local Ace hardware even has the (nicer looking) zinc-plated (shiny) ones.
Michael

 

[hermans13]

Manchester, I know that I have at least one of this type of Drain Plug. I will check my garage in the morning. I can send to you no charge,
Herman

 

[hermans13]

Manchester, I have 5 Oil Drain Plugs, you can have two if you want them. Two are exactly like your photo, two are the same but not plated, one has a smaller wrench square opening. Herman

 

[manchester1]

Manchester, I have 5 Oil Drain Plugs, you can have two if you want them. Two are exactly like your photo, two are the same but not plated, one has a smaller wrench square opening. Herman

Thank you. Let me check what home Depot has and I will get back to you. Much appreciated.