blues

  1. W

    Tecumseh H35 engine crankshaft blues

    Hi all, I am trying to rebuild my 1971 Tecumseh H35-45348H engine. Upon taking it apart I found the flywheel was loose on the crankshaft damaging both the crank keyway and flywheel. Some years ago I purchased what was supposed to be a NOS Rupp H35 crank. I pulled it off the shelf and looked...
  2. C

    Torque Converter Blues

    Relatively new install of a Series 30 on a heavy machine. One of my riders told me the the driven pulley is not moving. The driver only enough to propel the machine. This is happening at about 2800rpm engine speed max. Driven spring is in hole #1 and unit does move completely when...
  3. Doc1976

    gas tank blues

    lets talk about gas tank cleaning. I have a 3 horse tank that is a little rusty. I dont think its pitted, just surface. but the problem is that most of it is in the fuel cup inside the tank that cant be reached. any suggestions?
  4. ReapersRide

    Blown top seal blues

    I may have started this thread in the wrong section before. So I have a 6.50 Chipper Shredder Vac by Troy-Bilt that I did a repair of the bottom oil seal. Also replaced the Magneto due to no spark after I reassembled the entire machine it was still leaking oil from somewhere under the...
  5. ReapersRide

    Blown top seals blues

    I believe I pulled the bone head play of the season... Will oil from a blown top seal, short out the coil of my 6.5 Briggs & Stratton Vertical shaft small engine?
  6. patrick2260

    Clinton Engine Blues

    So I'm working on this Sweet 2 stroke Clinton for my Ruttman project. I really need to take a small engine class by the way.:doah: I super cleaned and rebuilt the carb and new gaskets. After starting the engine to work on the carb adjustments a couple minutes later I noticed some black oily...
  7. ozark caveman

    Bikes, Blues, and BBQ

    Fayetteville Arkansas. Last weekend of this month. I'll be there by myself if I have to but it'd be nice to have some friends. Grab some beer and some hot chicks on the back of our SWEET Choppers! LOL!
  8. patrick2260

    Twist throttle blues

    Bought a new set of grips and throttle for my Bonanza. They have allen bolts to attach the housing to the handlebar. Is there a trick I don't know about to get the whole throttle from twisting on the bar when I use it? I crank the bolts down to the point where I'm almost bending the wrench or...
Top