charging

  1. N

    CT200U Charging coil/fly wheel?

    Curious if anyone has found a coil and freewheel for the Coleman CT200u? I've seen it added to the predator, which I understand is pretty similar, I think! I want to run lights, but not off a battery. Thanks.
  2. R

    Battery charging

    How can I hook up a coil on a H 50 to charge the battery ?
  3. Thad

    Motor with a charging or lighting coil.

    I am looking for a link or info on where to get a reasonably priced new clone style or predator motor with a large enough system to power an old headlight and maybe a tail light. Under $200 would be ideal but.... I would prefer something new and ready to go. I am having a hard time wanting...
  4. hemigremmy

    Charging system on a Predator???

    So who has done this and where can I get the parts to do it from? Thanks in advance!!!
  5. 125ccCrazy

    5hp Briggs charging coil and flywheel

    looking to light up a 5hp for a small 3 wheeler I'm building for our Granddaughter, I thought some lights would be cool on it..
  6. T

    3 amp charging coil wiring to rectifier/regulator

    So I have 2 coils, each is 3 Amps with a single wire on each. I believe this means it's a half wave and one end of the winding is grounded to the coil itself which is then mounted and chassis grounded. I want to run 2 full wave 12v scooter/gy6 4 prong rectifier/regulators. One to charge the...
  7. OND

    (NOS) Briggs 5HP Charging Coil / Alternator

    Briggs 5hp charging coil/alt. for sale . I took this out of a Briggs NOS 5hp dual bearing block...engine was nos. $40.00 or best offer..free shipping. Sorry I no longer have the flywheel.
  8. MB165

    nos tecumseh charging coil, factory high ouput option???

    heres a interesting tecumseh lighting coil assembly. three coils.....tied together with a connector that attaches it to a full wave rectifier regulator. when i saw the photo online i didnt realize the lower right coil was tied into the setup. aside from the top coil which is 180 degrees...
  9. martinson83

    GX200 charging kit

    I got a used GX200 from eBay a while ago. I'm planning on building a mud motor for my john boat. I was looking into electric starter kits as well , and I saw they came with charging coils. When I tore the GX apart I saw it already had the charging coils and magnets on the fly wheel (no ring...
  10. M

    charging system

    I have a 6.5hp electric start clone and added a second charging coil so there are 2 under the flywheel now. This engine came with a small diode and the coil I took from a honda 9hp had a small rectifier. Should I keep both independent of each other and then splice them together after their...
  11. ATKRIDER

    New 2007 Honda GX160 With Lighting Coil-

    New 2007 Honda GX160T1 QXS2 with Lighting Coil- Standard 3/4" crank keyed I believe 2 7/16" long 5/16"nf tapped. Engine was just removed from box to take these pictures. I have had it since 2007. The tag says it is a 50 AMP coil but pretty certain it is a 50 WATT charging coil. At 50 amp this...
  12. M

    clone charging system

    I have a Hy-Spec 200cc 6.5hp electric start, oil alert engine. It does not seem to have a rectifier. When I compare it`s start switch assembly to one from a honda there are many less parts. The Honda has a key switch, circuit breaker, single fuse block, rectifier and something which connects to...
  13. I

    Honda GX160/200 charging coil output?

    Hey guys. I was wondering if any of you have used the single lighting / charging coil on the small GX engines. My qustion is.. Does it produce enough to run a small headlight and tail light? There is an aftermarket unit on ebay with a single coil that is priced right. It advertises a...
  14. Mr.GhettoRig

    anyone know anything about charging batteries?

    So ive been running one of those dynamo/generator light setups on my weedeater bike for a couple months now and im getting tired of the fact that they dim and turn off at slow speeds and stopping. both lights are supposed to run off 6v. So I was thinking, I've got a 6v battery laying around that...
  15. B

    Charging circuit for 98cc Lifan flathead?

    I acquired a used Lifan flathead (side valve) engine, which I have installed on a bicycle (I know, not a minibike, but not sure where else to ask, figured you guys would know). I downloaded a doodlebug manual so I would know what type of oil to use and a couple other things. The manual shows a...
  16. K

    Charging coil for clone

    Hello, I am stocking up on predator engines this week, they are on sale for 99.00.. One drawback, I really like the charging coil that is in the oem motors from Baja to power headlights and other accessories. Question, I have charging coils and extra flywheels with the appropriate internal...
  17. charging_coil

    charging_coil

    Charging coil wiring info
  18. Dave_In_Florida

    Lightened flywheel for charging coil?

    My friend and I are building performance 6.5's (fairly mild, 6000 RPM bursts). We do quite a bit of riding at night though, so we'd like to run a headlight. Does anyone make a lightened flywheel with the magnets in it for a charging coil? Has anyone had luck epoxying the magnets to an...
  19. paul_probus

    Potential Charging Coil Source

    I posted this in my original thread, but a thread dedicated to the topic may be better. I found the following link while surfing last night. I was trying to find the part numbers for the 18 amp. charging coils for either the Honda GX390 or GX340. Happened across a site that has the coils (or...
  20. O

    Charging options?

    So I removed the charging coil on my 6.5 Honda clone to add a billet flywheel. Is there a simple solution to power my head light now besides a battery? I really won't need the headlight very much. But I'm building a complete custom baja mini, and it wouldn't look right without the head light.
Top