fixing

  1. danford1

    What is it? Speedway? Is it worth fixing?

    I went to look at what I think is a Speedway today. At first glance it looked good and I was going to buy it then I saw the engine mount plate and jack shaft were cut out and some other plate welded in. He was going to make it a straight chain bike... What is this and is it worth fixing it up...
  2. jforb427

    Fixing up a Tote Gote VS

    I found this a few days ago, mostly complete, mostly original. I'm still deciding exactly what I want to do with it. My first inclination is to restore it as best I can, and ride it around. From what I've seen on the internets, there are several other examples around in rusty condition, so...
  3. B

    New (to me) Baja Warrior - Fixing Previous Owner problems

    Hi all, Picked up this Baja Warrior today form an old collector. Frame and such is in decent enough shape but the drivetrain is a bit of a mess. Pictures first: Let's focus on the driveline. It has a 6.5hp Subaru/Robin engine on it. Previous owner said the carb "is bad", and...
  4. Docdc

    Heald VT-3 Help Fixing Front Fender

    OK, I am going to put this out to everyone. I am restoring a VT-3 and as usual, the front fender is cracked around the mounting holes. I don't think they are too bad. What's the best way to fix this and get it ready for the plater?? Any help would be appreciated. Thanks Doc
  5. O

    original tires are 5.30,14.50x6 will 15x6-6 fit okay??

    Like the title says. I couldnt find shit for tires at tractor supply and Im just waiting on fixing the wheels and a new throttle so I can ride this beast.
  6. Iron Honky

    Original tc-1 off a roadster 2

    I have a used but complete original tc-1 with belt. Cover is cracker though but still good for a rider with some fixing up. Asking $100 obo.
  7. H

    The site

    is a bit of a wreck right now. I will be fixing it up as I get time. Thanks.
  8. E

    Fixing tire leak?

    So my rear tire was flat and i hoped that filling it up would be the fix, but unfortunately there is a slow leak from it (drains the tire in a few seconds with weight on it) but the hole is about the size of a pinhole, i think its too small to get a plug into it. Any ideas how to fix it?
  9. ogygopsis

    Fixing Loose Bearings

    In a separate thread where I talked about spacers; one of the fellows who replied mentioned that the bearings in his hub were loose and could be removed without the use of tools. Not a good situation! The body of a bearing is designed to remain stationary while the inner hub (which rides on...
  10. blkscorpion80

    Need help fixing a Wards frame

    Any ideas on how I can get this baby bent back into shape with items around the garage. I don't have access to a press.
  11. KB2ROCKET

    this post is for people that are new to fixing stuff

    What an adventure it is taking something apart and not really knowing what you will find inside. Here a just a few things that will help you 1. If you are unscrewing an adjustment screw count how many turns it took to unscrew it so you can put it back the same way it was 2. Lay parts on a...
  12. toomanytoys

    Fixing stuff...parts..?! rant/story

    I started a new project to do some repair work to my Ariens GT17 Garden tractor a few weeks ago. I cut grass with it about 6 times, found a few leaks on the pump again, a leak in the rear end, and a few odds and ends(loose steering, rattles, bangs, ect). Figured I'd replace the rigged up air...
  13. BC DAVE

    Fixing a flex-o

    As many of you know here..... :doah: I bought a "BIG BEAR SCRAMBLER" from "HARLEY PAPA" a while ago here on OldMiniBikes :thumbsup: Randy is DOWN TO EARTH :thumbsup: I have nothing more to say about the MAN.... He is MY friend :thumbsup: The bike came to me well packaged with care. Thank You Randy...
  14. markus

    fixing a vintage mini bike kickstand

    Ever bought a bike just cause it had the original kickstand on it? I have:doah: Ever got excited cause the bike does have the kickstand only to find out its all wore out and flops over and drops the bike? I have :doah: The kickstand on My ss300 western flyer is like that, and yes the deal...
  15. markus

    fixing a vintage mini bike kickstand

    Ever bought a bike just cause it had the original kickstand on it? I have:doah: Ever got excited cause the bike does have the kickstand only to find out its all wore out and flops over and drops the bike? I have :doah: The kickstand on My ss300 western flyer is like that, and yes the deal...
  16. trailramdan

    fixing a hole in a hole in a gas tank

    i noticed it drips when i got this bike, its my flamed ram....today i rode the hell out of it and its a steady drip coming from the bottom of the tank...i know they welded it to the bracket, im guessing it put a pin hole in it...so how do you fix a leak with out destroying my paint?
  17. H

    Going rate for fixing others crap?

    I have people coming out of the wood work wanting me to fix there crap. I do this as a "hobby" but this is starting to get rediculous. I should be making money doing this stuff on MY FREE TIME but yet i find myself just recouping for the parts needed and actually not collecting a labor rate...
  18. Mr.GhettoRig

    fixing a fender..

    I have a decent sized bite taken out of my rupp's rear fender.. and of course it HAS to be right where ya gotta bolt it to the frame.. any ideas on fixing it.. i mean its not one of those spots that your like "holy cow! look!! its where the fender connects to the frame!!! :out: :glare:" maybe...
  19. Oldschool

    FIxing things

    Thanks to the internet all those old issues of Periodicals that our Dad's used to read are easy to find again..... Popular Science - Google Books A quick search finds all kindso fovintaghe books on how to repair what today we often toss out. hope some of our younger members look at the...
  20. oldfatguy

    fixing a ez-spin cam

    I found an easy way to cut the high spot off an ez spin cam. I chucked the cam in my metal lathe and used a dial indicator to see where the high spot was. Then I put the cutter on the bottom of the lobe and turned the lathe chuck back and forth by hand to shave off the spot .This about .010 high...
Top