h35

  1. Christin83

    Lil Indian century id help? Lots of pics and reading inside

    Ok so I picked this up and prolly way over paid. But I have been wanting one for ever and I’m debating on a full restoration. Or just spray paint it and restomod it. The number on the back drop out is hard to make out they put the paint on thick on this one, as in the last owner but I think it...
  2. FunWithStuff

    What year is this Tecumseh H35? How do I read the serial number on it?

    I've recently acquired this Tecumseh H35 and was wondering what year it is. I know the serial number tells you the date on it but not sure how it's outlined on a Tecumseh. I appreciate any help I can receive. Thanks!
  3. IMG_000310

    IMG_000310

  4. IMG_000212

    IMG_000212

  5. Fisher1983

    Tec HS50 versus H35 Power Sport

    So...I'm in the process of building my HS50 5hp engine. I have seen that the OHH50 billet rod fits the HS50. Today I acquired an H35 Power Sport 3.5hp and opened it up. I realized that the crank cases for both engines are identical. In fact, the side cover gasket I bought for the 50 is the same...
  6. W

    Will a HS40 crank in a H35

    Hi all, Will a crankshaft out of a Tecumseh HS40 work in a H35? Both came out of Rupp min bikes. Thanks, Bill T
  7. W

    Tecumseh H35 engine crankshaft blues

    Hi all, I am trying to rebuild my 1971 Tecumseh H35-45348H engine. Upon taking it apart I found the flywheel was loose on the crankshaft damaging both the crank keyway and flywheel. Some years ago I purchased what was supposed to be a NOS Rupp H35 crank. I pulled it off the shelf and looked...
  8. W

    WTB Tecumseh H35 engine 33085 crankshaft and 30756B cover plate

    WTB: 33085 crankshaft and 30756B cover plate for a Tecumseh H35-45348H 3.5 hp engine that will be used on a 1971 Rupp Scrambler. Thanks, Bill T.
  9. W

    Tecumseh H35 engine for a Rupp Scrambler help needed

    Hi All, I am in the process of restoring 2 Rupp minibikes I purchased a few years ago. A purple Rupp Roadster II with original title and a Green Scrambler. Focusing on the Green Scrambler with a Tecumseh H35-45348H engine. Step one will be to obtain an exploded parts list, showing Rupp...
  10. B

    WTB: H35 Teceumseh from 1973

    Looking for a complete and running 1973 H35 Tecumseh engine. Has to be off a mini bike. Thanks.
  11. G

    Tecumseh H35?

    I have the Original Tecumseh 3.5hp that can off the Murray Track 2. I would like to rebuild and make a sweet little street mini bike with it. I am wondering what sort of performance I can get out of it? Looking to build a frame similar to this below. Parameters: Street bike only Looking for...
  12. danford1

    Wanted: H35 intake

    Wanted: Intake for an H35. It doesn't have to be pretty, just pretty cheap :-) Danford1
  13. R

    Best Inexpensive Carb for H35?

    I just picked up a Murray Track 2 built 2001 or so. It looks like new. The person I got it from said he and his 13 year old son had rebuilt the carb recently because it had been sitting. It would only idle for me with the idle turned up and was surging a bit as accelerating and at top rpm till...
  14. M

    Tecumseh H35

    Im doing a complete restoration on a 1968 sears wren minibike. This is a tribute build to my life long best friend who died 2 yrs ago of brain cancer. He had one new and would let me ride it despite his parents stern warning not to let any of the neighborhood kids ride it. Ive got the frame and...
  15. jeffdubb8

    H35 Lighting Coil Flywheel Questions

    I have an Aspera HT35 from the 1960's/1970's which for all intents and purposes is the same as an H35. I recently got an H35 lighting coil from an OldMiniBikes member and the flywheel rubs against the coil. Question is: are the flywheels on the lighted H35 engines different than the flywheels on the...
  16. Woody212

    Early H35 swap meet score

    Even the losers get lucky sometimes. I was at an auto swap meet and spotted this early Tec holding a trailer door open. I got it for $20! I didn't know if it would be a parts motor or a runner, but knew it was out of a mini bike. The guy told me came out of a Golden Pinto that he had at home...
  17. jeffdubb8

    H35 Lighting coil vs HS40 Lighting coil, same?

    Hi guys, does anyone know if an HS40 lighting coil will fit/work on an H35? Thanks.
  18. Sprocket86

    1972 Tec H35 carb options.

    Unfortunately the original carb on my 1972 DMP Scamper with the TEC H35 engine is shot. Someone over tightened the LS needle and broke off the metering tip of the needle in the carb body :censure: I hear no check ball rattle when I shake the carb body and the throttle shaft has a good amount...
  19. markus

    Tecumseh H35 1970 tag needed! Will buy, have others to trade etc..

    I need an ID tag for a 1970 H35 that got ruined during paint stripping process trying to remove some really tough paint!! Off a side popper is fine, will buy or I have other tags to trade, 1970 HS40 tag 1967 and 1968 H35, 1969 and 1972 H25 or other parts possibly worth about $35 :shrug: Thanks
  20. fhpe77

    H35 inspection and cleaning

    The guy that sold me the mini bike stated that the engine was a replacement and had low hours. The label on the engine agrees with the first part as the DOM indicates the year 2000. It already runs pretty good with the new adjustable carb but I like to clean out the carbon and check the...
Top