hookup

  1. drenchedgremlin

    Tecumseh mini bike linkage assembly hookup?

    I am hooking up a new linkage kit for my tecumseh h35. I am confused by the spot where the cable tip connects. I have circled the part in the picture, that im referring to. A few bolts and nuts camew with the assembly but not sure what they are for, if i try to use them to lock the cable down...
  2. trailramdan

    Throttle hookup 79cc

    I found a video a month ago and i cant seem to find it. I think they drilled a hole in the throttle arm and hooked up the cable there. Can anyone post the video or have some pics of what they have done on a 79cc predator
  3. B

    Hs35 throttle hookup need help

    I just got the kit from OldMiniBikes and installed it just like the old one and now the throttle is full open and chat figure what's wrong. Any help would be awesome.
  4. jeep4me

    Original Powell throttle hookup for 5hp Briggs

    I'm selling an original throttle hook up that came off the original 5hp Briggs on a Powell Challenger. Includes cable clamp, clevis and return spring. Spring may not be original equipment, but that's what was used on this motor. Can be used on most older 5hp Briggs on any bike, but it's Powell...
  5. M

    Mikuni carb throttle cable hookup

    I just got my carb for my 212 predator and I hook the throttle cable up and and it only has a very short travel on the throttle now I'm using the stock doodlebug throttle assembly and cable, I think that the end of the cable that goes into the carb might be too long because I'm about 99% sure I...
  6. B

    newbie need help with throttle hookup

    have a baja 6.5 and the spring that is black and hooks to the inner side of the governor arm has broke I re bent end of spring but now it idles to high i guess its to short now where do i buy that new spring
  7. E

    Throttle Hookup on B&S 2hp

    Ok, I'm very new to the mini-bike world, except for the one I built 30+ years ago for myself. I'm trying to build one for my son, I bought a used frame without an engine. I had a good 2hp B&S engine off a McLane lawn mower. I thought wow, easy, I'll just take the engine off the LM and deposit...
  8. W

    Tecumseh power sport 6hp throttle hookup help

    Trying to help a friend with hooking up the throttle on his go cart. The throttle stays wide open and doesn't go to idle when it's started. It's hooked up on the side and doesn't pull the throttle, it just slides on the spring shown in the pic. I've searched this site as well as others...
  9. ianmanning26

    how to: throttle linkage hookup clone engine, easy

    I have been struggling as of late hooking up my throttle linkage on my clone engines and I came up with an easy way and a safe way to do it so I figured I would share it with anyone who may need the advice. first I went to northern tool and bought their throttle linkage kit . then I threw...
  10. Miniwood

    5hp flathead Throttle hookup

    Have 5hp briggs flathead with the gas tank mounted to the carb.has the upper and lower throttle and choke hand levers. I hate the way my throttle is hooked up directly to the top part of the butterfly. This makes the throttle pull way too long; I have to regrip the throttle handle(grip) and...
  11. C

    tac hook up on honda clone

    just woderin how to hook up on the tac on honda clone:smile:
  12. Clayon

    6.5hp Clone light hookup

    does the honda clone already have a magnito for a light, or where can you get one? :shrug:
  13. drenchedgremlin

    Help with a gx160 throttle hookup

    my minibike hasnt been used in several months due to the clutch teeth getting grinded up, so i ordered a new clutch the other day. My bike is a gx160 on a sears frame and i was messing with the throttle hookup. But then after i put on the clutch and went out front to try out the bike. I had the...
  14. G

    arctic cat hs40 throttle hookup

    I installed the tecumseh throttle assembly on my bike but the arm on the carb doesnt get pulled by the spring that runs under the carb to it-it has the rod on top going to carb and then the spring to the tecumseh assembly-is there sposed to be another spring or rod on this?
  15. G

    arctic cat hs40 throttle hookup

    I installed the tecumseh throttle assembly on my bike but the arm on the carb doesnt get pulled by the spring that runs under the carb to it-it has the rod on top going to carb and then the spring to the tecumseh assembly-is there sposed to be another spring or rod on this?
  16. delray

    H40-H70 throttle hookup, randy

    awesome pictures randy of the BIG BLOCK throttle hookup. glad you had it posted.........thanks:thumbsup:
  17. jeep4me

    Tote Gote throttle hookup

    I'm on the home stretch now for the tote gote nova 680 project. I unfortunately didn't take any before pics of the original throttle hookup. If anyone has a tote gote with the hookup that attaches from the top of the carb (on a 6hp briggs w/updraft carb) and could take a couple of pics for me...
  18. Mac

    Briggs Throttle Hookup

    Just another idea of hooking up a throttle on a Briggs. It allows you to run the original air cleaner too. I designed this little unit years ago & sold them on eBay for awhile. .
  19. cncd11

    throttle hookup on a tillotson

    is there a kit out there for an easy throttle hokup? and if yu can post some pics of yours.
  20. P

    New Throttle Hookup

    Trying to figure out how the cable fits into the twist grip throttle and how the grey outer plastic housing fits into the threaded hole under the twist grip throttle. If someone has photos it would help. thanks olepete
Top