input

Hello all, I recently purchased a used monster moto 80 with the predator engine swap already done. I had a chance to ride it with my daughter over the weekend and have a couple questions. First and foremost I ordered the CVT kit as her legs were too close to the chain and the clutch got wayyy...

Hello - Picked this up on CL, runs pretty great, but the brakes needed some work (wouldnt move without the rear dragging). Got it home and rode it around, ended up finding some trails near me which i had no idea existed. Sweet. Here are some pictures of the hog. Based on my research...

Thank you Fatboy Be forewarned.... The front tire is the stock size 19 x 7 x 8. The rear is what Kenda calls a "rear" tire and the smallest size for a rear is 19 x 8 x 8. Some on the forum have said they clear but just barely. The chain does not clear the side wall on these MB200 frames. I...

We picked up a azusa bike with a 6.5 predator motor for my nephew. It needs a clutch cover or chain gaurd badly. What has others done on these bikes any links , pics or input? Thanks

Hi guys, Yet another question. Been reading for HOURS, but thought I'd just ask... My son and I have completed our engine build (SO MUCH FUN!!!!), and are in the final stages of mounting, working out kinks etc. I need some input on drivetrain (clutch/TAV) Our engine is as follows: Predator...

Just scored this Cat 400ts running for $200! My first mini bike so I'm sure I'll have tons of questions! Please give me your input or advice! I'd like to resto/mod this so it's a solid rider!

Good day all, With a lack of metal shops to purchase from locally I have to order parts required for my build. So what I am in need of is some input as to what size pipe and bushings are needed for the job. I plan on using 5/8" axles and would like to use brass bushings because I would like to...

Hey guys, i recently put an upgraded air filter, new main jet, and exhaust on my 6.5hp engine on my DB30. I also bought a torque converter and strapped it on! The only thing is, with the 72 tooth (i have a 12 tooth sprocket on the TC) I pop a wheelie any time starting out, even 1/4 throttle...

Though not totally sure year maybe late 60's early 70's due to the lack of lighting. Any input will help me nail it down. Thank you

Hey Ya'll~ Rookie Marc here with a couple brake, seat and suspension questions. I've searched the old posts and many of the topics were very helpful, but a few questions still remain. After ordering 6" Astro wheel setup and Hilliard 3/4" 12t clutch and 60 t sprocket, Im still a little...

So I've acquired a a 77 Puch moped that I'm doing some custom work on. Just sold off the original e50 to begin the headache of installing a completely different engine. Mainly, because the engine needs a rebuild which means I may as well upgrade which means $$$.. For the price I figure I could...

Note: Hope I'm posting this in the right place, if not let me know or move it for me. Need your input on stance. I'm leaning towards the lowest or last pic.. I've eliminated the front shocks and was going to fab a single coil over for the rear but, decided to make it a full rigid frame. Let...

Ok here is the deal. Im building a drag bike of sorts and I have a question regarding the clutch set up. First off the engine is a Tec 8hp. Im running 6in wheels with I believe 8in rear tire. I have 2 different rear sprockets, 40 and 72 tooth. Now Im debating about running a centrifugal 12...

Hey all im brand new to the site! Thanks for letting me join! so i have this brake drum that came with the bc-1000 im restoring.. problem is that it dont seem to be the original... any help>>>??? thanks and looking foward to getting my feet wet here~!( hope i got the uploadin right!)

MB165 input sprocket of the jackshaft drive. Just curious if this an off the shelf #41 5/8" bore sprocket like one you would find at mcmastercarr. I'm also afraid of pulling the nut off, as I don't want to mess up the nylon lock. I tried googling last night for a while and searched here :shrug:

I'm trying to set up a HF video system at my shop and rather than use a TV I'm trying to use a flatscreen monitor.... which has the VGA input and the output from the video box is RCA. I got an RCA to VGA adapter, but still not getting a signal. I'm thinking I may need some sort of conversion box...

Hi there, I'm trying to put a Briggs and Stratton 10 hp motor off a generator on it and the motor just fits in the frame but I'm wondering what I'm going to have to do with the crank since its tapered and has no key way, has anyone here run into this before ? Any help is appreciated

I have my Baja Heat listed for sale. Guy calls and offer a Taurus .357 revolver, holster, and 4 boxes of shells. Says it only has about 20 rounds fired through it. I know nothing about these. Any input? I really don't want a gun as I have the itch for another project but, this sounds like...

on our hot rod pedal car the throttle is rigged up on the steering wheel so you can run it with your hand.....its a good idea but the cable binds and isnt tight etc...anyone know a better way to run the throttle? any input or kits that i could buy to make this run smoother? like i said its a...

tc88 sorry about the typo in the title here is what i have on my rams....the green one we almost had running this weekend but the driven seems to be missing rivets. it was really loose and made the pulley egg shaped notice in the pic how the right side is bowed out. after looking at it closely...