push

will the stock 5.2" non-hemi predator push rods be long enough if I am going from stock rockers to championship rockers? Or will I need longer ones? Thanks

I have a 79cc completely stock engine with about 10 hrs of runtime. Last time trying to start it the pull cord felt like it got hung up. I gave it good hard pull and it came free. Now pulling it I feel no resistance or compression. Pulled it apart and found a bent rod that I believed happened...

I need a rear foot brake push rod like this one only shorter. Its for a Toyoco Beta 400 and i picked up this Honda one but its way too long. The one i need is about 13 inches. I dont see how this one can be shortened without welding. Want one with its spring, cleavis and so forth on it.

Just installed a set of NR's chrome moly roller rockers a few days ago, im having issues with push rods. I have my head deacked .060 and have already been running shorter rods to compensate. Had to have shorter yet after installing the new rockers, went down to a 5.26" rod, but im only getting...

I think it will be cool to build this mini push mower so thats what im doing :laugh: Im using a little 2 stroke snowblower engine from an old snowblower and the deck is a lid from a smoker grille. It was too rounded on top for my liking so i cut it out and flipped it over to have a recess for...

Hello everyone. I have a 212old style. Getting ready to order parts, im taking out my governor so I'm going to get a fly wheel rod a cam new springs push rod lifters and maybe rockers. The only thing is I don't know which to get. They all have different specs and I don't want to get the wrong...

So I have 2 motors with similar builds... 32/28 valves ported, 310 cam, billet flywheel, 40 though longer rod,flat top piston, billet lifters, hl380 tilly on alchohol, 1.3 roller rockers. Here's the question, One motor started as hemi, the other non. Would the hemi block one need 5.440...

I picked up this all original Rupp Scrambler a couple weeks ago. TONS of rust.:laugh: I just wanted to make a beater bike and not spend a bunch of money. First thing was to get the wheels straightened out. I hate when I can't push them around. All the bearings where locked up, bent rims and...

On early Lil Indian rear disc brakes do the push pins go in with the domed end pushing the puck or the flat end? Anyone ever glue the non actuator puck in place to keep it off the sprocket? Just wondering. Thanks.

so i recently bought a mx1210 bonanza mini bike. it has a 3.5 tecumseh. so i took it for for a ride. and it ran out of gas. after a long push home. i gased it up. but now it wont start. please help

Hello I have just finish building my new engine, its a hemi bottom end with a 18cc honda head milled 50 thousands. I am concered about the pushrod length, will the stock non hemi pushrods work or do i need cut to fit pushrods? I have started this engine already and it seems ok but i would like...

Here is a question for you engine guys I am rebuilding a honda qa50 engine from spare parts The only thing I am missing is the push rods I think I can cut some new ones and round/ polish the ends on my lathe Do you think 3/16 drill rod would be suitable ? I am most concerned about hardness...

So my hop up kit came with new rods. Well they dont fit with the stock rod guide. WTF can i grand these out to make more space?

What kind of lawn mower is this!

20" Lawn Mower 60 Horsepower

Like the title says, at what point should chromoly push rods be installed? I am building up a gx200 clone, I'm removing the gov., billet fylwheel, billet con. rod, 18lbs springs, dyno cam .275 lift .236 duration, CNC bored box stock carb, and a header. I have heard of the push rods...

Cut to length chrome molly push rods 5.750" about 40 feet left of tan header wrap 35$ shipped for both.. agk has the headerwrap for 38$ retail, cut to length pushrods 30$ retail and still in packaging.

I would like to find a old Honda push rod type on motor for sale

Hey guys I'm new to the site but always see alot of good advice on this forum when doing a search. I have a 6.5 clone, my setup is governor removed, 18lbs springs, gx140 emulsion tube,88 main jet, drilled low speed jet, k&n air filter and billet adapter, custom header, arc billet flywheel...

Here's the place for all those "odd ball" contraptions, powered or un-powered, that ruled the sidewalks of our youth...... not to be confused with the Freak Kart thread...vintage only here..:hammer: