scrambler

Finally the Harrison is in my possession! This bike looks and rides fantastic. Original seat board with custom cover. That's a looong seat. I've been reading everything I can find on these Harrisons. If only Phil Harrison would still be active here.. I've read that @cheezy1 & @mrpat grow them...

Does anyone know if this would be a direct replacement for the rear wheel on a 71 rupp scrambler? https://www.OldMiniBikes.com/-10-steel-wheel-chrome-plated-with-5-8-id-precision-ball-bearings-35-sprocket-and-drum-60-tooth.html or could I get a plain wheel and reuse my stock brake stuff and...

I picked up this old bike, has a 4hp tecumseh engine and it says scramber horse on the tank....but i have yet to find another picture online of the same one. Any information would be helpful! Thanks in advance!!

I just aquired this 1970 Rupp Scrambler and a vintage cr I want cane up for sale so I need to let it go. I don't know much about them but no cracks in frame and original tires. Starts and runs. But I am rebuilding the carb anyway. 1000$$. Located in Southern California. Email...

Hi all, How do I tell if the H35-45348H 1971 Green Rupp Scrambler engine I am working on has the correct block? Thanks, Bill T.

Hi all, Does anyone have the details on what it takes to modify a Honda GC160 for a 1971 Rupp Scrambler? Thanks, Bill T

I recently picked up a 70s scrambler horse that is brand new in the original crate, it never been opened or put together. I can't really find any photos of one like it on the internet. It has a yellow tank. Any info and value of it would be appreciated, Thank You.

Hi all, I am trying to rebuild my 1971 Tecumseh H35-45348H engine. Upon taking it apart I found the flywheel was loose on the crankshaft damaging both the crank keyway and flywheel. Some years ago I purchased what was supposed to be a NOS Rupp H35 crank. I pulled it off the shelf and looked...

WTB: 33085 crankshaft and 30756B cover plate for a Tecumseh H35-45348H 3.5 hp engine that will be used on a 1971 Rupp Scrambler. Thanks, Bill T.

Hi All, I am in the process of restoring 2 Rupp minibikes I purchased a few years ago. A purple Rupp Roadster II with original title and a Green Scrambler. Focusing on the Green Scrambler with a Tecumseh H35-45348H engine. Step one will be to obtain an exploded parts list, showing Rupp...

Rupp Scrambler

I grew up north of Detroit. My father and I bought a Scrambler minibike at Kmart. It was blue. I for some stupid reason never took a picture. Does anyone remember this minibike or has a picture? Thanks Doug

I have what is left over from a 1971 Rupp Scrambler parts bike. There is alot of good parts on the bike or can start a cheap build with it. Price 150 firm. Can bring to Windber for free.

mini bike offer is retracted

8.00 US each Shipped 2.00 US discount off each extra decal in your order.

Hi folks, I'm new to the mini bike world but was looking at a scrambler horse today that looks like a copy of a 50 mini trail. It has a tecumseh 4 stroke, a jack shaft but is missing parts as well (clutch cover, lights and one tank badge) After spending a hr or so looking at old posts on this...

I don't want to but if I am going to have my students build mini bikes each year I have to have the money to pay for it. This is a Rupp Scrambler that my 8th grade students put together for the 2016 Build-Off. Below is a list of stuff that was replaced. I would like $1500.00 for it. I have a...

Here is the 72 Rupp Scrambler I will be restoring for the Vintage Class. I'm debating turning it into a Hustler. THe differences were a Hustler had front brakes and a 4hp engine. I have all the Rupp parts to add the brakes and it currently has a HS40 on it. I also have all the new Hustler decals...

Not mine but wanted to get the word out there https://southbend.craigslist.org/snw/5905849136.html

Found a K&M scrambler local to me, OG paint complete, needs a bit of assembly, has new tires and tubes, has a Briggs alky flathead, any idea what its worth? I'm thinking around $250