suspension

Hey Guys, Recently just picked up a CT200U-EX for dirt cheap, rough condition but I just mainly wanted it for the frame since I plan to fully strip, paint, rebuild etc etc. The front shocks have some rust on it and instead of restoring them I wanted to see if there is any upgraded shock kits I...

Hi all, I just got this bike from a guy at work. Its kind of a basket case. At least it was free...now I have a summer project, not that I needed another. No spark..If anyone has any ideas on where would be the first place to check I'd be grateful. I did switch the spark plug. Its also...

so im new to mini bikes and am looking to buying one. I have been looking at the ct100u and the cc100x. But they have no front suspension.(i dont really care for suspension in the rear). and i found this...

I have a bonanza bc 1100 that I want to convert with a swing arm. Also, I need lower forks, springs, and retaining nut for front suspension.

Looking for a Trail Horse full suspension roller or full minibike.

Hey guys I’ve just got into the older mini bikes scene and decided to pick up an old MTD Columbia bike, don’t know too much about it but I have some questions. So in the first picture is the top I’m assuming of one of the front fork arms and I can’t quite figure out what that bent piece on the...

Figured I'd see if any one out there has a suspension Trailhorse frame..I have 2 non suspension frame I was going to try and convert

i found some random mini bike stuff. Was wondering if these are most likely taco suspension?

I actually lifted this idea from a woman on YouTube. She bought a bobber seat kit and added it to her CU200T. I just changed it up a bit and think it works better. She used the two holes in the cross bar where the rear of the seat is attached. I thought it would be better to have the springs at...

I bought these to use on frankenbike, but never got around to it. The top triple tree has a few extra holes, but the forks are in otherwise great condition.No shocks included with the sale. I think it's the original fork bolt, and it's included. The lower bolts are the wrong size and are just...

I put this together about a month ago. Works well, especially off road in bumpy areas...Replaced original base with 3/4" plywood, bolted 2 valve springs to it with fender washers and lock nuts on the back side, bent a right angle in a 6" T hinge for the front and added a piece of 1/2" plywood...

I'm looking for a complete front suspension for a 71 to 76 Rupp, Enduro, Black Widow, Roadster2, Scrambler or Hustler. They all had the same front suspension on them... I need the triple tree, fork tubes, springs - everything. Let me know what you have, what condition it is in and how much you...

Looking for a full frame Alsport, any condition. Willing to trade a running ts8 alsport with a newer 420cc 13hp engine and disk brake. Located in south Michigan, willing to travel!

Frantically trying to hunt down an original Alexander Reynolds Easyrider suspension seat and shocks for my stretched rat bike/resto-mod. Thanks to J Ackerman (an OldMiniBikes forum member) I now have the original frame mounted gas tank. Also searching for re-production decals if anyone can help...

I'm upgrading my Speedway Green Horn front suspension to a real hydraulic suspension and wanted to know if there's an aftermarket pit bike setup that I could retrofit. The main issue is that the fork is secured to the steering neck with a 1/2" bolt going thru nylon bearings and all of the pit...

Like it says up there. Looking for a roller in good shape. Let me know what y'all got.

anyone have a rear swing arm suspension doodlebug i already converted the front to motovox mb11 forks with doodlebug bars.

This roller has great patina. Fork decal is there. Original parts except wheel sprocket, jackshaft, gears and band brake. Oh and obviously the kickstand. Slap on a engine and throttle cable and go. I'm shuffling things around and this is in the way. $450 Will ship but it's big and heavy so...

I would like to put some shocks or springs on my bike to ease the ride..would anyone know of something to do with the fork and what to do with the seat?? Thanks to all.. Fred

I recently got my whole bike painted in a booth about 3 weeks ago. My suspension has been making a horrible screech and just not functioning properly since the bike was painted. As you can see the paint is chipping off (pics below), am I supposed to lubricate it or something? Any help is...