tricks

I am getting to the point that I need to purchase and install a jackshaft on my Build Off bike. It is a Baja Warrior that Is stretched and has a 420cc Predator going in it. I have a 40 series TC for it and I will need a 3/4 jackshaft. Do you have any tricks for squaring up all the pieces...

I need to strip and repaint a few engines, I was wonder if anyone has some tips and tricks , does or don'ts ????

I've trying to finish 3 of my 4 bikes, everything is done with the exception of the chain. I've got everything measured. But the chains keep getting thrown. I think it is an alignment issue, does anyone have any tips and tricks on getting chains to sit right??

Hi all. Just started a minibike/scooter/bicycle project. Here to learn some tricks from the veterans.

I'm just wondering what people will say, I think this thread will help a lot of people out, but what are some of the free tricks you guys do to make your motors faster and have more power, I cut off every other lip on my plastic flywheel fan, set my spark plug gap and drill out the jagged points...

Hey fellas, I'm curious if anyone has attempted to revive old grips. Are there any tricks you've tried?

Since a lot of people have bought the knock off 30 series from China and had troubles I thought I would make a post to share a few of my tricks.... Lets start with bushing. Thats not a China or OEM part. Its my own bushing, you could have some made too ( or make them yourself if you have a...

Since a lot of people have bought the knock off 30 series from China and had troubles I thought I would make a post to share a few of my tricks.... Lets start with bushing. Thats not a China or OEM part. Its my own bushing, you could have some made too ( or make them yourself if you have a...

How to make reedvalves for pulsejet engines - YouTube

I thought to start a thread to cover wheel and rims tips, tricks and IDing..... Azusa 10" steelies (Knock off on the left and real Azusa on the right): Real on the left and knock off on the right: The knock off has 4x 3/8" (nearly 10mm) thru bolt holes vs 4x 1/4" holes....

Anyone have a good trick for removing grips?

i tore it apart made sure it was in good conditiond put it back together removed govener and low oil sensor ported and polished the head set valve lash at 3 intake 3 exhaust just for break in and had to make a rig up a aftermarket air filter off my atv because it would not run right with stock...

working on the mystery bonanza and the lower legs slop back and forth fairly much....not enough space to make a shim and wrap around the tube or to insert a nylon liner.... my thought was to put a braze all the way around the lower legs where they fit in the upper half and then use an old...

alright well the first time i posted this thread it got realy out of control. this time lets keep this form for TIPS , TRICKS AND HOW TOOS. This fourm is try to get every ones helpfull and very good info in one place. thanks for any tips and stuff, i beleave this will help the fourm bring more...

any little tricks diy parts and how tos

The baja 30 was major under powered out of the box here’s a bunch of little things we did to get some more micro ponies out of her. (Remember it doesn't take allot to impress an 8 year old and his friends) First removed all the annoying stickers, I think we dropped 20 pounds. Did save them...