Son wore them out. Tire recommendation needed for 5.30/4.50-6

[christopherteam]

My son finally wore out (side split) the vintage 1969 "General" brand tires on my Fox Trailbug. I'd say between the original owner, myself in the 70's and 80's and my son, they owe me nothing. I will probably remove them, clean them up and hang them up in the garage as a keepsake.
So for new tires was thinking of a pair these or I am open to recommendations.
https://www.amazon.com/gp/product/B076YQZLW6/ref=ox_sc_act_title_1?smid=A30Q829I7Z52M2&psc=1

 

[Skipp]

Any will work….for 6” I like Coker 14x6…. I think there is even a Carlisle out there with that tread pattern….

 

[sparkwizard]

Coker tires are real, soft, rubber.
Most of the newer tires (china) are hard, shiny plastic looking garbage.
Those ones you posted from Amazon look like quality tires.
I doubt they will last 50 years, though.

 

[christopherteam]

Great. Thanks for the feed back

 

[DaddyJohn]

So for new tires was thinking of a pair these or I am open to recommendations.
https://www.amazon.com/gp/product/B076YQZLW6/ref=ox_sc_act_title_1?smid=A30Q829I7Z52M2&psc=1

I think the style is fine, but those particular tires are vastly overpriced. You can get them much cheaper ($12ea) at Lowe’s, or here: https://www.northerntool.com/produc...50-6-load-range-rating-a-model-wd1051-5326747

 

[creia]

I think the style is fine, but those particular tires are vastly overpriced. You can get them much cheaper ($12ea) at Lowe’s, or here: https://www.northerntool.com/produc...50-6-load-range-rating-a-model-wd1051-5326747

The link you provided is for a different size (and significantly smaller tire) than what the OP is looking for.
Michael

 

[DaddyJohn]

The link you provided is for a different size (and significantly smaller tire) than what the OP is looking for.
Michael

Whoops, they are the indeed narrower. I’ve been using them on Birds and other minis that use the skinny size. My bad!

 

[christopherteam]

Whoops, they are the indeed narrower. I’ve been using them on Birds and other minis that use the skinny size. My bad!

Bummer those would be ideal in right size