5hp

These are from 2 Baddog engines I bought on ebay for a dual engine project. I decided to cancel the project and part out the engines. All I have left are 2 crankcase covers with bolts, 2 cylinder heads with bolts, & an electric start flywheel shroud. I am asking $35 per item, but willing...

briggs 5horse with 1" keyed and tapped crank $40 plus shipping :thumbsup: pm me and i can text or email pics

okay so I can get a 5hp Honda overhead cam... can I swap any of the parts off of this and put it on my predator for performance? and suggestions would be greatly appreciated :thumbsup:

have to unload some parts I had stacked away for potential projects. All parts are from a 5hp Briggs model 130202, some of the parts are NLA Shroud with recoil: undented, lite to moderate surface rust, but no holes, good inside, although recoil mechanism works I...

Hello, i saw alot of tuned flatheads with Tilltsons, this KZPML Krakow(only thing that is written on it) is also from a chainsaw. Its from a Polish Dolpima 2 stroke, arround 12HP and i want to know what are your experiences with chainsaw carbs on briggs!

Question Will a 5HP flathead briggs tank mount on a 3.5 HP briggs flathead Or are they different. Thanks

I am having a problems figureing out even a part nuber for this thing! I need a 3/4" output crankshaft, the engine number is a 130232 1541 01 (1987) It is ball bearing supported on the PTO side only, uses the old style one way ratchet starter (long snout crank). Need a usable one as mine is...

I have a little OHV 5HP Power Sport engine with the governor still attached. I was thinking of removing it. Does anyone make a billet flywheel for these motors, or know where or which model I would need? Thanks!

Hello Everyone, I'm trying to hook the governor back up on a 1969 B&S 5HP engine with tecumseh carburetor. The governor arm is there, but I can't figure out how to hook it up. A link to pictures on how this is done would be great. Thanks for your time and help, Lyle

I have two Tecumseh HS50 motors for sale. First one, I believe, is an actual minibike motor. When I got it, it had the correct throttle hook up and dog leg exhaust. But it has since been robbed of the throttle hook up and exhaust. I have never had it running as it was missing half of the...

How do I remove the flywheel? :confused:

Hello to all that have decided to read my post. New guy to the forums here. After searching craigslist and ebay for months for a Briggs IC 5hp flathead I have came here in a last ditch effort to find what I am looking for. I wont say I couldn't find any but the ones I did come across were either...

I had a couple didn't use them. Thought I saved myself one. Guess not. Anybody have one they'd like to get rid of let me know

wanted......air filter spacer for a briggs 5hp, anyone have a used one laying around??? .....

5hp briggs engine with billet Clements head .010 piston and crane cam. Not sure which one there is a mark on the number. 3 stage header. Throttle kit. The black is a VHT engine metallic black pearl. Header is sprayed with VHT flame proof paint. Did not clear coat shroud or tank. Block is super...

What are some recommended mods was thinking 22mm mikuni and header. Or should I do something else. What do you fellas think? Never built a Briggs all info is appretitated.

Hello, im new to this forum, and 4 strokes. Know the basics, how it works, what can go wrong, how to tune it and port & polish shit. Know alot about 2 strokes and porting on them and about carbs. My brother is convincing me that a 27mm Jieli carb is NOT needed on a 5HP, not even on a 8HP wich...

Hello out there !!!!!!! I am in the in the beginning stages of restoring my Gilson minibike. The only part that I am missing is the exhaust muffler. I have other ones that will work,but not the correct one. Its the one were you can slip the full chrome exhaust pipe over. Please someone help me...

I'm wondering of putting a newer HORIZONTAL 3.5 hp flathead Aluminum flywheel on a 5hp flathead. I'm aware of the modification to the coil which isn't an issue because I've used the Cast Iron 3.5hp flywheel, but how will the horizontal aluminum flywheel work in terms of Revving for High RPMS 7k+...

Selling a 1969 Briggs 5hp flywheel cover. A little toasty, but could be repaired. The two lower mounting holes are worn out, one is slotted out. Black in color. Nice patina. Working condition is ok. Was original to the motor on a Tote Gote Mini-Gote. Pictures today after work...