aluminum

We now carry the lightest weight billet aluminum flywheel on the market made by RacesEng for the Honda/Clone motor: RacesEng S1 Billet Aluminum Finned Flywheel - If you are racing in the box stock class, billet flywheels are now mandatory and this one is a great choice. - If you are not...

I'm looking for a nice, clean cylindrical aluminum fuel tank. Maybe around half gallon size. A new unused or lightly used tank works too. Thanks.

New aluminum cylindrical fueltank. 3-3/4" X 7-1/2" Polished. $95.00 plus shipping.

Here is a picture of the new aluminum gas tank I just built for my arco. I am in the process of building another for my other minibike. While I am at it i thought a would build a couple extra if anyone is intersted. They are about 3.5" in diameter and abot 8" long. (about 1/2 gallon). They have...

Hello, Anyone know how I can make a piece of 4.5" diameter x .6" thick aluminum circle about 1/2" less in diameter? Would a 40 grit flap wheel on a grinder work, or maybe even a disc, belt sander?

Taco Steens Minibike Taco 44, 66 and Series 1 99 Small Logo clutch covers This type of cover was used on the Steens Taco 44, 66 and Series 1 99 models. I believe this part to be a reproduction, but are unsure exactly when it was made. As far as I can tell, this cover is exactly the same...

In the post from X90-rider cleaning the aluminum rims has one of the hardest tasks. What did you use to clean and polish the rims? Did you take them apart, split rims and clean them separate? Do you have to do anything special to bolt them back together? Thank You

Possibly an old 5" Tab-Loc rim. Uses tapered bearings. Looks to be in nice shape. Sprocket can be thrown away or modified. $70.00 Delivered or trade for OEM Powell Twist.

Five inch aluminum wheel with a aluminum 50 tooth sprocket has a couple chipped teeth on it and one of the bolt holes that holds the rim together is cracked but I don't think it would cause any problems with normal use . Not sure what this wheel fits but I bought it as a 6" wheel off Craigslist...

New aluminum gastank. 4-1/2" X 7-1/2" $130.00 plus $10.00 shipping.

Worn, but still usable. I'm sure this fits several Sears/Bird bikes, but this particular one came off a Wren. $25 shipped

billet aluminum triple trees, 5/8" bolt hole, 7/8" fork tube holes, 6.875" center to center. can easily be polished. $115/pair shipped 2 pr available mark

The long-anticipated 6057 Billet Aluminum Sidecover is now available. Not only does this sidecover look great, but it adds structural integrity to the block, increasing engine durability. Features include: •Side-by-side dual ball bearings for the crank main journal, adds an additional...

Anyone know what alloy number tecumseh used in their blocks? I have a HM80 snow king with reverse shaft im hacking off today. Will turn out a plug for the hole in the side cover then Id like to weld it in. Anyone done this before? Pete

Whole lot for $40 + shipping whatever that may be. I think the rim and double indian head tire should be worth that alone. Not looking to run around and get shipping quotes, so use your best guess, make a solid commitment and I'll get them boxed up.

I know there was a thread related to the one I'm about to make but I can't seem to find it and don't know what to search anymore. So, I removed the aluminum on the GX200 so that the TAV will fit. But isn't it bad to remove it? I mean it looks like rocks and dirt could get in there and cause...

hi im new here just trying to find out if its possible to hone an aluminum bore tecumseh. or is it better to sleeve it . i have the means to do it either way but my friend who's a automotive rebuilder says you cant hone aluminum bores they will wear out prematurely. but the lawn mower guy down...

Does anyone sell a classic style aluminum frame?