built

This is the wagon I built for my 2 year old son. He loves it we take it to car shows, and other things.

i got the 6.5 clone i bought here set up and running. i put it on my kart(sorry). the idle is fine after tinkering with the carb and jet.,thanks Mrbungle for all your help. with the required parts rod,piston,springs, and flywheel i was afraid to take it up to speed. it is fast, fast for a...

hi i have a new built 6.5 clone it has a rod ,flat piston and 18 lb springs. i bolted to a gokart frame to let it run.it runs a little rough and loud.? it shakes at a low idle. it is easy pullin but takes .10 good pulls. nothing seems to grind when i pull it. . what first? pull the honda...

How can I find out what year my old B/S engine was made ..I want to buy the proper engine decals?

How much power are some of you guys making on a modified clone motor tuned on pump gas (ex: 91-93 octane)? Anyone in the 20-25HP range?

Harrison Wildcat for sale with built up 6.5 clone that = about 18 to 20hp on gas. The motor has just about every after market part in it that you can think of except roller rockers. About the bike Seat and handle bars are like new. Has band brake on the rear wheel. has big brake lever. jack...

Got a tilly for $25 shipped on Ebay then shipped it to Korndog, he worked it over for a stock to mild briggs fiver and Cheezy1 sold me an intake. Both very coool dudes and I'd like to give em props for hooking me up. Need a pump and to decide what to use it on but it sure looks pretty on my...

Charles(MDB) just finished putting this .080 over clone together for me the other day, and I thought I would share it with yall. Specs: .080 over piston, milled flat, block decked to MDB specs. Arc .020 billet rod Isky Custom .370" cam!!! Champion forged stock ratio rockers. MDB ported Genuine...

6.5 flat top piston arc rod arc flywheel 308 cam chrom push rods .060 milled head 26lb springs locks and retainers SI valves ported custom intake (no not an animal intake) 8mm plug wire 24mm mmikuni never started, hasnt had any oil or gas in it.. TAV NOT INCLUDED NOR 4 SALE...

I built this suspention fork today and man what a difference! Much smoother now its a joy to ride. I hit the same ditch that pitched me over the bars the other day and sailed over no problem :thumbsup:

This site is awsome, I was wondering if anyone on this site has seen or heard of the canadian made minibike called the SPROCKET? They look alot like a ruttman I must say and I found a pic of one online, any info, thanks. Sorry about the turned pic, cant figure out why they are comming out like this.

i am wanting to start a build of my 5hp briggs flattie. i have found ample information on the site but the one thing i cant find..... how to swap out a carb with attached gas tank for a normal carb..... i want a mikuni on there. any help would be awesome.

Used 3/4" iron pipe. I can add the muffler if it's late. I have some cleaning up to do as well as hi temp paint. What do you think?

Ok i have now had this idea in my head for awhile. Since I am pretty good at fabricating i wanna build a off roadgo cart with full suspention and a atc200 motor. I have been looking for some ideas but havent found much, i found alot of shifter carts that are low to the ground but i wanna...

Lil Indian 1970 Engine ID H30 Built June 8 1970

built from scratch bike

I have a hb 6.5 clone with the following:billet rod/billet flywheel/flat top piston/gx390carb with highflow filter/2stage header/valve springs/14cc head/1.2 rockers. I trying to figure out gearing with one of the calculators, and im wondering what kind of rpm i can turn with this thing in my db?

I just picked up a db 30 and im going to do the 6.5 clone swap with some goodies from agk. I was wanting to run a fuel pump set up since, im doing the rod/piston/cam/head upgrades etc. Does any body have a pic of a db running a fuel pump setup? Also if someone could point me in the direction of...

I was given an old Mini bike and want to know what the name brand and year of the bike is..... It's in ok shape ...all is there except fenders and motor...Any help would be greatly appreciated...... The bike has major curved handle bars and almost vertical front forks with built in spring...

Not that I'm going to restore today's find. I just brought this home. Even though it runs and rides I might put a big block engine with elec. start. and a more manageable front wheel on her. Just curious to know if it has a name the members here are the best at identifying these minibikes.