driven

wanted comet driven 30 series belt drive. must be the 7" with 5/8 shaft. will also need a long jack shaft.

I found a new Max Torque driven clutch (secondary) with a 3/4 bore, ok all sounded good there until I went to get bearings, I cannot find a good sealed high speed 3/4" x 1/3/8" bearing anywhere, the local bearing shop can't even find a listing for it.... Soooooooo my thoughts were to either get...

I have a 7 inch driven series 30 with 3/4 bore for 60.00 15.00 to ship in the states ,,