h80

I would like to install a starter motor on my Super Bronc that has a good running Tec H80 on it and no mounting holes for the starter. I bought the flywheel and the matching 12v starter motor from a lawn tractor engine. Has anyone done this successfully? Is there anything I really need to...

Hi guys, Picked up an old h80 Tecumseh . Cleaned the carb and got it running . Changed the oil and was careful not to overfill. It runs strong and idles perfectly but oil is dripping out the breather. It does not smoke at all. If the rings are worn would it not be pumping blue smoke out the...

I've finally started this project... bought a can of paint and painted the frame.

Good Lord what a nightmare this stupid thing was. Had to be done so the motor would work in the Grasshopper. An H80 intake upside down with an H40-70 style intake at either end to level the bolt patterns... I ground off the bump from the H80 intake to gain a little clearance and rigged some...

H80 intake upside down with H40-70 intakes manifolds at either end... :confused: What the hell it worked... He insisted on this motor..