hardware

Looking for a Trail Horse 6” Rear Wheel (5 spoke) with both the sprocket and drum for band bake or even just the sprocket and band brake drum mounts

I have a set of axles with spacers, foot pegs and bolts and rear wheel adjusters. Also a rear clutch cover bracket. Not sure if adjusters are original but they were on the bike and everything else was original. $40 shipped

Selling my original Ruttman Triangle Head engine mounting bolts? wheel bolts? 5 1/6 x 1 1/2 long quantity 15 and one extra 3/4 long.. $25.00 shipped anywhere in the lower 48 Paypal

Nice set of 6" kidney beans. Complete set. With sprocket and original mounting hardware. Nice shape. Bolts ame out with no issues. No cracks or breaks. Sprocket is 72t $200 shipped for what you see here.

For Sale,I have 16 original Large Triangle 5/16-18 Bolts from a Ruttman Minibike.Had these for a long time 15 of them are 1 1/2 long and one is 3/4 long,some have the nuts as pictured.Most likely for the wheels or possibly mounting the Engine. Asking $35.00 shipped anywhere in the lower 48...

Looking for various nuts, bolts, axles etc, etc. Could really use some original vintage engine mount bolts, various length axles and axle bolts with nuts. Can always use the "All Metal Center locking nuts" of various sizes, small up to 15/16" RBW brand bolts (any size) always needed, as well...

Fox Brake Caliper and Mounting Hardware with Flanged bushings for flotation.

I was curious if anybody out there had all of the sizes of every bolt and bushing and bearing on the DB 30 new style? I've got on OldMiniBikes warehouse.com and I can find the parts but they don't list sizes or if they do they don't say where that part belongs for example they have a lot of bushings on...

I had bought an MTD roller to use as a donor to freshen a survivor up that I have but decided not to. Hopefully there are some guys that can use some parts to freshen theirs up or complete them if needed. I did not want to clean anything as everyone has different means and ideas of what they do...

I just rolled it into the garage and haven't checked to see if the hardware is metric or not. What do you guys think?

Hello OldMiniBikes'ers I need a few of the 3/4" NPT exhaust nuts, the round ones with the notches on them to tighten them down. I know I can use hardware store stuff, but I want the old skool thick ones. They chrome up nice! Let me know what ya got! ...and thanks!:thumbsup:

Shipping not included in prices in case you want more than one item, all came off a Butcher bird that was butchered :laugh: Wheel #1 (bearing and spacer included, OG hardware) $20 wheel #2 (bearing and spacer included, OG hardware) $20 Sprocket $18...

I have a 1970's Ruttman Ugly Mini Bike that i have completely rebuilt. Frame, fenders wheels bars pegs levers are all freshly powder coated. new bearings new seat new brakes new chain new clutch new tires. All hardware on this bike is either stainless steel or grade 8 hardware. This bike has...

Back when I was restoring a lot of bikes I sourced these hard to find "staked" nuts and OEM engine plate bolts to give the restorations that crowning touch. No lockwasher necessary with these, just a flat washer so you get that clean factory built look. If you...

When I was restoring a lot of bikes I always tried to put them back the way they were originally built...including the hardware with unique markings, heads, etc. A bit obsessive yeah but that's how I did it. Anyway I have this bag marked "Bird Condor" ....so I assue I took this stuff off a...

At least that's what I wrote on the box...don't know why I would lie to myself :biggrin: I must have had 25 Cats over the years...some I parted out. There are axles here threaded on both ends...head tube/fork bolts, spacers.and the "staked" pinch nuts. Clearing out...$17 shipped...

Looking for original Cat hardware such as wheel nuts and bolts, axles, fender mount 8/32 screws, misc nuts and bolts, cable clips, etc, etc, etc. Please PM me....Paypal preferred. Thanks in advance :thumbsup:

Looking for a jack shaft plate, components and cover for a 212 clone on a Baja MB165, just picked one up and it's missing jackshaft, mounting plate, cover and gears, chain too but I have a piece for that. If you have it Pm me and lets do some bussineess:thumbsup::thumbsup::thumbsup: thnaks...

I did a search on this and didn't really come up with anything that could help so here it goes. Maybe this will help on future searches as well. I got my drum brake assembly and of course there is nothing that connects the cable to it. I've seen some great pictures of how it's set up with...

Have rust and some chain rash on the sprocket side, they are straight, work good, springs are good, included is the stepped bolts for the tops and the reducer spacer for the bottom which bolts to the axle. Off a 1970 trail tramp. $35 shipped