linkage

Hey all, I bought a mini baja, but it didn't have a carb on it. A really cool guy has since given me a dead engine that came off a warror, but he had taken a few parts off of it. When I bought my mini baja, it came with a bunch of parts. So here's where I'm at. I'm pretty sure I have...

I switched the intake from the factory one to the rupp slanted intake and now I am not sure if I have the correct governor link to the throttle. It is a HS40...what length should it be and what is the correct part #? Thanks, Bob

i bougt the throttle linkage from agp and hooked everything up, but i started my clone today and when i give it throttle from the lever it doesnt give that much power to the motor but when i put the lever to the rabbit posistion it runs fast. What needs to be done so that i get that power to the...

Can anyone provide me with some information on how the brakes were originally setup? I've only got the drums on the axles and the bands around them are anchored to the frame. The other end of the bands are unattached. Was there a bracket or compensator that hooked the two bands to a single brake...

Hi I am working on a 1970 rupp roadster And have a odd favor to ask? could some one post a pic of the carbarator linkage. The one I'm working on has been doctored and would like to put back to original. It looks like it has been doctored down on the pull start side back side of the motor. If...

I have a doodle bug with a 6.5 clone and the gov'na removed. i was able to hook up the throttle assembly but i found that the stock throttle cable is too long for the new throttle assembly. Does anyone know where i can get a shorter one?

throttle linkage

I have a 6.5 clone that I just removed the governor on and for the life of me i cant figure out a good solid, not sketchy way to hook up the throttle. Please help- I have a pride race next weekend. PS: I have very limited access to machine tools- I have a compressor,bench grinder and have a...

I have a 5hp B&S funpower series model 136212-0132-01. Had to buy a new gas tank and forgot how all this linkage to the gov and throttle all go back the way it is supposed to. I should have taken a picture before tearing it apart. If any knows or has a manual please help, Im going crazy. Its for...

I'm trying to get my rupp roadster that i used as a child back working. I replaced the governor pin. Old one was bent and the throttle linkage was off. I am not trying to hook up the linkage and can't get it to work correctly. Does the throttle linkage that attaches to the governor pin have...

Ok so I did this today in about 30 minutes. I will include my video that shows how it looks and it working (engine not running) Will have a video of it running soon. things you need stock throttle brackets off of the DB30's engine the bolt that holds the throttle control on the 6.5...

Any one have pictures or ideas on a choke linkage for fun power with gov removed. pictures attached of throttle linkage but i want to keep the choke and air filter Thanks

I'm in need of a Tecumseh linkage part that goes on the side of the cover. I included a picture of the one I currently have, it look's like someone just chopped it in half , and with the bottom missing i can't get it to work correctly. So if somone has one handy please LMK. Thank you!

I have a Craftsman mower, model number 917 37929, with a Tecumseh engine. I recently pulled the carb off to clean it up, reassembled and now am having issues getting the throttle linkage put back together. It has the dual system carburetor (fixed idle and mixture) and the throttle (two settings...

Hey guys, I need a little help here. I'm lost as to what I should do for hooking up my throttle linkage. The engine (I think) is an HS40 in a '72 Rupp roadster 2. I have absolutely no linkage parts and would love to get this little beast up and running again. I went ahead and purchased a...

dont know much about clones as i am not into them have a homelite 6.5 hp looks like a clone to me but like i said i know nothing about them its missing the gov arm and linkage to carb it is from a baja heat the big tire one with the fake tank if you have this please pm me thanks

Bought one of these kits for my engine, but not exactly sure how to make it work... and no instructions. Before I spend a lot of time and effort figuring it out, I might ask if anyone else has any ideas or pics? eBay]eBay Motors: Briggs Throttle Kit Go Kart Bar Stool Racing (item...