power-dyne

I just picked up a Power-Dyne Galaxy Chopper, what year did they make these? I need a Mesinger seat for it, anybody have one they are not in love with? Also need a chain guard or at least a pattern, any help would really be appreciated. Thanks

I bought two minibikes for parts a while back i think this is off the power dyne, just been glass beaded & looks new, great shape, no brake shoes, but will include the old brakes if needed, they are shot! $40.00 shipped i know some of these bikes came with the front rim for this brake...

What you see is what you get. No more,no less. "As-Is" This offer will be good for 30 days only...then no longer available. 1st $400 Firm PayPal free shipping.

Hi everyone. We need a gas tank for our 71 Power-Dyne mini bike. We need it for our build-off bike. Thx.

Hi, this is Matt, Damian, Cameron, Xander, Draven, and Austin and we are "Team Wbam"! We are students in the Career Based Intervention Program at West Branch Middle School in Beloit, Ohio. We are entering the "Under 17 Class". Our mini bike is a 1971 Power-Dyne.

Vintage Power Dyne Mini Bike Wheels Rims Tire 60T Sprocket w Axles Hardware | eBay

I picked up this base model Power-Dyne survivor :thumbsup: It needs a couple of small things but it should make a great little rider :thumbsup:

Brake Caliper No Name of Power-dyne. I believe pads are bad and cal has nicks. 25.00 shipped Rupp R2 Headlight re-painted assume bad lamp has hardware and plug 15.00 shipped Bonanza Headlight repainted assume bad lamp. 10.00 shipped Kickstand low profile 2" I believe. Off Power-dyne...

Parting out a Power-Dyne chopper. This listing is for the Kickstand only. We all know what the Cat kick stands sell for! When was the last time you saw a short special kickstand. Made for vintage choppers only. Most bonanza's, Power-Dyne and many more low choppers used these specials. Get it...

Parting out a Power-Dyne chopper. This listing is for the Foot Rail Assembly W/ K & H Caliper. This rail assembly is in great survivor condition. You don't see these very often, not even on Ebay. So get it before I list there. Just look at OldMiniBikes Power-Dyne choppers in the pic section. Their...

Parting out a Power-Dyne chopper. This listing is for the seat only. It's a true original Mesinger Seat. Has a tear in upper corner (Shown) and underside. Even with tear on underside t still holds strong to the pan. This seat in great survivor condition. You don't see these very often not even...

Power-Dyne Cougar, Pretty rough ,but savable. $40.00 pick up only.

Hi, Looking for a fuel tank for my bike, it looks like the one on the bike pictured below. Thx Mike

same guy that had that kart for 50 bucks Mini Bike power-dyne Galaxy Chopper Frame {RARE}

Totally re-done, brand new 212 cc clone engine, new Max-Torque clutch, new band brake, new chains, Dayton bearings & billet pillow block mounts, brand new 16" wheels with 10" rims {final gear ratio is currently 5.25}, new sprocket, new steel fenders, new seat, new shocks, added rear footpegs...

$175.00. Pickup highly preferred but will ship at buyers expense plus $25.00 towards dis-assembling/packing/materials. Add 3% for PayPal. Cash, check {must clear}, U.S. Postal M/O is fine. Too many projects. As shown, not running {no idea why}, missing throttle/cable, exhaust, was told the...

Power-Dyne wire wheel bike circa 1972. Has running 2.5hp Tecumseh with torque converter (not Comet). Excellent frame and fork, never crashed or rusty. Seat, mirror, and throttle are Yamaha pieces. Foot-peg bar was re-welded on one side (not visible) Needs two spokes and general tinkering...

powerdyne parts front wheel, looks to be in very good shape underneath the spray paint, I see no noticeable damage/nicks chipping. Has original Ardan tire on it, not in terrible shape some dryrotting but no flat spots. The tube is no good. Insert spacer is still in between bearings and it...

* I got this Power-Dyne awhile back. My boy wanted to get it set up & take it for a test drive before we started to customize it. It does have a brake caliper bracket on the left side. No pegs. My questions are; What model? Year? Who has a tank? Yes, i do have the OG rims, we...

Thanks to NorthEastMetal for the roller...and Thanks to Javelin-73 for dropping it off.