pull

i have a 3hp 1972 aluminum pull start fly wheel cover. from what i have herd 72 was the only year they made these but don't know for sure. Will they with stand the compression with the compression release removed and a 2hp head?

Looking for a pull star for a 2008 hensim 98cc motor. I have no part number to go by. Any help would be greatly appreciated. I know nothing about these motors but need the starter for a mini bike project. Thanks # off of motor: HS152F 08L04612 Any info on motor helpful also.

Selling a B&S pull start and shroud. Came off an old 6? hp engine. $15 + total shipping or Best offer.

needs the complete assembly thanks Timothy

I'm experiencing alot of compression when pull starting, at times its so much it pulls the bike off the ground. but when I get it started it runs great. any ideas? I added the .265 lift cam and flat top piston. Its also spitting fuel out the carb at times when pull starting. I thought it might...

I need a gx160 pull start, I'm sure the gx200's will work also, to complete my motor. Black in color or yellow prefered (so it goes with my theme) Used is good as long as it works Thank you SJ

Its not perfect but I hate to pull the decal off since it is an original. Its in an hs40 remote mount tank motor, dunno what Arco its from as the motor was actually mounted on an MX bonanza when I got it:doah: I don't own an arco and I will probably repaint the motor or use another black recoil...

Need a pull start for a honda 160 .

I melted the plastic pulley inside the pull start and need another one,Figured I would try here before E-Bay.Never weld on a frame with a full tank of gas:confused::shrug: Scott

This may be helpful to someone in the future because when I had the problem with the recoil trying to rip my arm off, I was told the compression itself was the cause then all I kept reading was valve lash. I was searching for troubleshooting and repairing compression release on clone cam. I...

Is it easy to re-clock the Predator pull starter as with a B&S or does this open a can of worms? Spanky

So my flywheel wasn't going a complete 360* and my pull starter was snapping back when trying to start it so i knew there was an issue. I removed the spark plug and now the flywheel turns without a problem. When i put the spark plug back in, again, the flywheel stopped turning. Can someone give...

I just removed my carb and put a new jet in and when I put everything back together and went to start the bike up, the flywheel and fan wont spin now. I really don't understand what the problem is! If anyone could help me figure this out, that would be great.

I have a clone 6.5 with no governor so I decided to get 18 lbs springs. I watched the how to vid and now I'm having a issue. After installing everything I'm able to turn the flywheel a couple types smoothly, then on the third turn it becomes impossible to turn with a lot of force needed to turn...

Hi guys, you have always been so helpful so I thought I would run this by you to get some help. I have a 5 horse briggs motor built by turner racing engines and I orginally had a tool the former owned which went into an cordless drill to start the motor. It was a socket with a sort of slip...

Any ideas why this rope is not recoiling all the way in?:shrug:

And maybe a gallon of paint remover?

Hello everyone, my first post. I searched but cannot find an answer. I crashed my Lil Indian and destroyed the pull start on my 212cc 6.5 harbor freight motor. I am in need of the pull start but cant find one anywhere. Can someone point me in the right direction or tell me what else I can bolt...

Ok it's a 5hp. I have the shroud and clutch installed. When I install the pull start the last 3/8 to 1/2 inch is spring loaded and gets very tight when all the way on. FYI It's a raptor so maybe the shroud is different. Is this right or should I space the starter out somehow. If I'm going to...

Kawasaki pull starter in working condition off of a flat head Kawasaki, i think it was a 5hp, it looked just like a flat head 5hp briggs motor.. $15.00 shipped us postal money order only from your post office..