rupp

Hi all, this is my first post on the forum because I just got my first classic minibike yesterday! Just picked this bike up, the owner didn't know what it was but I thought it looked cool. I've done a few hours of research, and I have the bike narrowed down to I believe either a Rupp Cub or a...

I didn't notice this until I looked at the 68 XL500 tank for sale on EBay. Is this an early generation Rupp tank? Every '68 tank I have seen has a triangular plate mounted on the bottom to which the mounting studs are attached. This on has no plate, so the studs are attached directly to the tank...

I just aquired this 1970 Rupp Scrambler and a vintage cr I want cane up for sale so I need to let it go. I don't know much about them but no cracks in frame and original tires. Starts and runs. But I am rebuilding the carb anyway. 1000$$. Located in Southern California. Email...

I just bought a Rupp that says Scrambler 2. The engine has H35 45348 serial 11380. It has no front fender and no head light. What is it???

Hello all, I got this Roadster last year from a woman who had it when she was a kid. It wasn't running when I got it as it's had a few people before me tinkering with it. Time to get serious and dig into it. Looking forward to learning from everyone here and perhaps sharing what I learn.

Posted these in photos section, but not sure if that's just a storage spot. Anyway, here are two shots my 12 y.o. son took of the Rupp he's been riding since we completed the restoration this spring. Based on a bunch of other shots he's done, I think he may have an eye for photography...

Hello, Seeking a few pics of survivor 71-72 Rupp carb's. Left and right side. I just recv'd a couple but would like a few more from other members to see if they had differences from the factory. Help would be appreciated. Regards, Joe51

Hi all, How do I tell if the H35-45348H 1971 Green Rupp Scrambler engine I am working on has the correct block? Thanks, Bill T.

Greetings everyone, This is my first post in the forum and I look forward to any help I can get restoring my recently acquired 1971 Rupp Roadster 2. I know these original came with a Tecumseh HS40,but mine has a HS50. Is this engine interchangeable with the original Rupp primary clutch? Any...

I have a Rupp c350 that is missing a seat. It's in good shape and has decent paint so I want to find a seat that fits the survivor look. Thanks for any help

Rupp Parts for Roadster, Enduro & Scrambler P/N 15247 Front Fender - $125 + S/H Chrome is in very good condition for being 47 years old. It has some shelf wear & minor rust spots on one side just above the mounting bracket. P/N 15140 Rear Fender - $150 Each + S/H Both fenders are in...

Front & Rear Fender & TC Guard

Front & Rear Fender & TC Guard

Hello, Not sure what these are for. Possibly a Rupp Go Cart. They are for a 6" rim. Narrower than the mini-bike rim. Missing hardware as far as I can tell. No air valve holes. Been in storage for years. $65.00 shipped. Postal Money Order if interested. Regards, Joe51

Hi all, Does anyone have the details on what it takes to modify a Honda GC160 for a 1971 Rupp Scrambler? Thanks, Bill T

My Father and I Started this project when I was younger, we ran into some speed bumps that slowed down the build, and then I joined the military. after seven years of serving, my father recently passed away, I have the bike now and I am determined to finish it for the both of us. the last hurdle...

Sorry, the bike is a little dirty from Windber, but it'll be cleaned up this week. Nearly complete 1969 Rupp Sprint Survivor. The engine was gone through and the valves were lapped, new head gasket, new crankcase gasket, new spark plug and crank seal. The carb was giving me fits, so I...

OK so I'm new to the jackshaft scene, it's a rupp contintal and it's missing the jackshaft and rear fender brackets I'm thinking about making the brackets but the Jackshaft ? .so can I get some sort of aftermarket one or does it have to be O.E. and if I can use an aftermarket one is there one...

Hi all, I am trying to rebuild my 1971 Tecumseh H35-45348H engine. Upon taking it apart I found the flywheel was loose on the crankshaft damaging both the crank keyway and flywheel. Some years ago I purchased what was supposed to be a NOS Rupp H35 crank. I pulled it off the shelf and looked...

I bought a rupp mini bike for $100. It is a dual suspension and has scrub brakes. I am looking to upgrade to either a disc brake or a clutch brake and am looking for some advice on what I'm better off with. Also the handlebars don't line up with the front wheel properly so I'm looking for a fix...