spring

After a few day in searching about valve spring shims I have done nothing but confuse myself. Im hoping you guys can straighten me out on this. Here is what I have....212 predator, mod 2 cam, 18lbs valve springs, exhaust retainers and lash caps on both intake and exhaust valve, billit rod and...

Built some shelf's over the weekend .I don't have much extra room so this helped a lot.Put some earthquake straps in tonight,a must for California.Some of the Honda's will get moved to make room for 2 more Bonanza /Hodaka

and this is what happens when 250 inches of snowfall melts in three days our road flowing over the driveway the pond is full

WHEN A GUY THOUGHTS TURN TO A NEW MINIBIKE !!!!!!!!!!!!!!!!!! SO i haven't bought one in awhile !!!!!!!!!!!! WHAT ONE MORE GOING TO HURT :shrug:

my son has an intech 6.5 that he wants to put the animal rod and cam:hammer:, also a bilet jr flywheel, my question is i have tons (like 20 to 30) different flat head springs and a spring pressure gauge,:shrug: can someone tell me the spring pressure and install height on an animal spring hoping...

I have, but I am actually making more of a mess than when I started:doah: I have way too much stuff. I've been trying to some "feng shui" in the garage and attemping to get rid of anything I really dont use (well except for the bikes). I now have stack of crap for the swap meet, I just have to...

The Midwest's Largest Car Shows - Madison Classics

sunny and 50 degrees today.played in the yard for awhile and did some laps through the woods spring sleddin' - YouTube

OK, Here's what I've dug out so far. PRICES DO NOT INCLUDE SHIPPING: 1) Tecumseh H60 - Part Number 143.756022 which is equivilant to a H60-75489N.Runs good. 3/4" x 1.75", keyed, un-drilled shaft. Hole drilled in the ugly original exhaust. Plug wire insulation is damaged right near the plug...

Hello, A little puzzled on this one. The first shock came right out, quick twist to thread the bolt out of the spring at the top and it all slid out. The next shock: quick twist... slide down and CLANG! Something is hanging it up, firmly. I tried tapping with a hammer, then banging with a...

Day dreaming..........

I need the flat circular spring that goes on a Tecumseh throttle control for a mini bike. I could not find the part number or part anywhere.

I see that Allied Leisure has Lil Indian brake return springs back on ebay. But, the pic & the specs don't add up. The pic.... The specs... 3 1/8" overall length 1 1/2" coil length 1/16" wire 7/16 coil diameter If you count the number of coils in the pic, multiply by...

cat 400 spring before

cat 400 spring before

cat 400 spring before

Need the fork spring for the early small Lil Indian frame.

Is there an optimum spring for the New BSP2 cam(cl1i)? i have the 10.8 stk spring and 18lb. would anything more than 18lb be overkill??

Where do ya'll get those goofy springs that go on the brake cable for a clutch band brake? Thank you in advance.

i have a 6.0 motor with a comet torque converter it takes off real hard what spring do i need for a smooth take off