On my vintage bike the rear sprocket set-up was" " the sprocket weld onto the rear brake drum.
The sprocket was worn out, so cut it off the drum carefully, now need to decide if I should buy another sprocket and machine hole to fit over the drum and weld again?
Or swap the brakes to the other...
So I'm trying to fit a 40/41 sprocket (40 Teeth preferably) on a Astro wheel .. Currently i have a trail horse hub but I'm unable to find a sprocket for its size -.-"
Welcoming Any advise
Original Heald VT-3 seat. The usual rips and tears. $15 plus shipping.
The white seat is a Fox small wheel seat. Almost no ripping at all. For a Trailbug...Doodlebug...those types. $25 plus shipping
The black seat is for a Doodlebug DB30. No rips, no tears and the spot you see...
Hi guy
Just got a Baja doodle with a predictor hemi 6.5 hp. The mini has a 72 inch sprocket on the rest. The bike got tons of torque but ar half to 3/4 speed sakes like hell. I like to cruse atound 20 mph but it's shakie there . Can I switch to a smaller rear sprocket to get the rpm down some...
I am getting an old pedal car to throw a 49cc like this Bicycle Engine Motor Pocket Mini Bike Scooter ATV H EN02 49cc 2 Stroke | eBay and i was wondering if i could make the engine sprocket larger so i could go faster and then put a smaller one in the rear, anyone know if this is possible...
Just finishing my 71 rupp bandit resto and the only thing I have left to do is fix the rear sprocket. 71 bandit used a different sprocket than any other rupp so there not easy to find, mine is bent just a little but Before I take a hammer to it is figured I'd ask around to see if anyone has...
I broke a tooth on the jackshaft. I braced a crow bar on the sprocket to remove the bolt on the other side to paint the frame. The bolt didn't budge and a tooth on the sprocket snapped off. :hammer: I had to cut off the bolt with a grinder and now I need a new jackshaft and a sprocket. I know...
Really, any 6 inch rear wheel, sprocket and internal brake setup will work.
Toss me a line, let me know what ya have and $$ shipped to Florida.
Thanks for sure.
i'm putting together a fox sprite for my son. i want to put 4 inch wheels on it. i'm kind of having a hard time finding ones that i like. i=these ones at OMBw are decent. however, i'm not quite sure which sprocket and spacers, etc i would need to match with the wheels.
the wheels...
Can somebody tell me if this rear sprocket needs to be replaced at this time or does it have some life in it,by looking at pic. It doesn't feel or look pointed, but don't have one to compare. I'm attempting to restore an ARCO bushmaster (unknown year, probably mid 70's) to fun and safe...
I just bought a supercharger and the rear wheel has some broken/missing spokes. As soon as you get any speed on the bike the rear wheel wobbles like crazy and it pretty much makes the bike un-rideable. I know this is a long shot because they're really rare bikes these days but if anyone has one...
Hello all,
I've been having quite a bit of issues with my rear sprocket. The rim and sprocket are a one piece assembly, and cannot be seperated. The tire size is a 4.10x3.50x6. The sprocket doesnt appear to be "true" and wobbles when rotating. At higher speeds i believe it is causing the chain...
All,
I would like to gear down my rear sprocket from a 60T to a 53T. Here is my problem. I have an AZUZA Tristar rim with a drum brake. The drum and sprocket are one piece.
Question
* Can I machine the AZUZA Drum/Sprocket to remove it's teeth on a lathe , leaving me with just a...
All,
I have an AZUZA (Well sort of) with a Tecumseh OHH60 6 HP motor. I am running a TAV2 Torq-A-Verter. The rear wheel sprocket is 60 Tooth using #35 chain. The problem is WHEELIES! This bike will wheelie with the slightest input of throttle! We aren't talking a 2" wheelie we are...
I am wondering what would be the best sprocket set up ( front and rear tooth count) for my doodle bug with a 212 predator engine swap? I am 200 lbs and was looking for a good mix between take off power and top speed. Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.