suzuki

1987 Suzuki Fat Cat

Looking for a Suzuki Trailhopper,looking for a complete one..no major projects.Thanks..Joe E-Mail or phone 347-885-0036

Hello there guys I have literally had this thing sitting in the same spot since I aquired it. I need to move it out for the sake of having more space. Willing to part out anything on this badboy make me an offer on anything on here has speedo carb wheels muffler bars mostly complete...

Anybody in Michigan, got a running Suzuki RV90 1974 or newer they don't want anymore? It must have the title, and be capable of being registered again. I'm really wanting to get one. It appears they are only like 2 inches larger each way than my Ken-Bar MB6 minibike, BUT, they have full...

I am looking to add a rv 125 to my collection. I know certain years had the duel range tranny thats what I want.. Anybody know which years? Thanks.

Need the following to finish this project. Fuel petcock,exhaust baffle & spark arrestor inserts and both brake levers. Also never know what I'll need in the future so let me know what you've got. Thanks.

I have a very small vintage 3 wheel suzuki i think 50 cc dose anyone know what suzuki called it ? It's in storage and i want to research it on line for parts but don't know what to call it. Thanks for any help.

I recently acquired a pair of 71 suzuki MT50s and a 75 honda MR50. I have a complete MR with great spark and a clean tank. The engine has little compression so i know im going to have to do a top end. I have heard this bike is collectible and can sell in the range of $2500 with a full...

I just found this sight it is really cool! tons of info. I just picked up a 73 suzuki trailhopper that it pretty good shape. Its all complete but the problem is it doesnt run. Im not getting any spark at all. Does anyone have or now were I can find a wiring schematic. Thanks Dan

This was my first bike. Ive had it for 10 years now and its time to start restoring this. Ive already aquired a bunch of NOS stuff as well as genuine parts and service manuals. I noticed a few other members on here have these too and I should consider myself lucky as mine is complete. But it...

cAN ANYONE TELL ME WHERE I CAN GET PARTS FOR THIS BIKE THE GUY I BOUGHT IT FROM SAYS IT NEEDS RINGS BUT IT STARTS AND RUNS BUT STALLS OUT AFTER ABOUT 20 seconds or so can anyone help please... Sorry for YELLIN lol:scooter:

Looking to purchase a Suzuki Trailhopper,I am located in the NYC area ,can pick up or arrange shipping..Thanks.Joe 347-885-0036 or E-Mail jbaycycle@aol.com

I am looking to buy a Suzuki Trailhopper,looking for complete bike,I am in the NYC area ,can pick up if local or arrange shipping ..Thanks..Joe 718-828-2720

i had a bunch of left over jr 50 parts and didnt know what to do with them WELL here is what i have decided to do still in the building mock up stage but think it is coming out ok let me know what you guys think would love to hear some input and maybe even some ideas

I've been working on this bike as a resto rider for another young kid (15) that is my younger son's girlfriends son. His Dad is kind of a jerk and pretty much just tears the kid down. Anyway, I got this bike for $0 from a co-worker. It had no spark and had sat outside for about 15 years...

New piston kits include piston, rings, wrist pin and circlips. For ts50, jr50, lt50 (four wheeler) and arctic cat kittys (with suzuki engine) . Sizes available: 41mm(std),41.25, 41.5, 41.75, 42, 42.25, 42.5. These are new Italian manufactured. $50 (or 2 for $90) shipped to lower 48. Pm if...

I am going to sell the 1970 Suzuki Trail Hopper as I have run out of time this summer. I was told it ran good when parked and should have the carb cleaned out and new gas put in. The seat could use a new cover but it has good compression and mechanically seems sound. Local pickup is the only way...

I'm working on a ds80. Can anyone tell me if I need to split the cases in order to replace the main seals, the right (clutch side) main seal in particular. I've removed the side case, clutch basket, gear on the end of the crank, and the plate that supposedly holds the bearing into the case, but...

Hi everyone, I'm new to this site as this was my first mini bike, I've always been into honda 50 and atc 70's but now that i have seen some of the way kewl american made ones i'm going to be on the hunt. So I have a 1979 Suzuki OR-50N(rebel) or called the MAME TAN in Japan. these were only...

trying to get a bit more top end out of my sons little suzuki 50cc. i have gone up 1 size on the front sprocket, all restrictors are removed including oil injector. I have ridden the bike and when you are on the flats it seems like there is some sort of govenor keeping it from reving any higher...