wanted:

Hey Fellas, I'm looking for this brake. It's for a 5" drum. I believe it's a Fairbanks. Thanks! :thumbsup:

Looking for an El burro sand'n'sno style big bike. roller//frame set?//complete? Might be willing to trade my '84 honda atc70? if interested. or Cash of course.

Looking for a pair. Let me know what you got! Thanks Chris

Looking for a set of wheels for a project. 5" Something in the mid-Michigan area would be ideal!

Hey guys I'm getting tired of messing around with my stock pulsa-jet. If anyone out there has a tilly GAS carb and tank I'd be interested. Im willing to pay up to $100 for the pair. Thanks!

I'm looking for a few cams. I need a 107- ss. 110. And 94-ss. I'm from CT and willing to pay up to $40. Thanks

must be in good shape.. prefer 3 stage..

I'm looking for an early model H70 Tecumseh that has a lighting coil...Preferably 1970's or older. Thanks. If you happen to have something bigger like an 8-10hp with a lighting coil that might work as well...Thanks!

Hi there, I'm looking for a front fender for my DB30. I know lots of guys have been running them without fenders so I thought I'd try to find a used one first since I will be repainting it. If you have a steel front DB30 fender that is in decent shape, not twisted up, etc. that you would...

I’m wanting to restore an early 1970’s Rupp “Mini” Go-Joe to it’s original condition for my grandson. According to the research I’ve done, it came with a Tecumseh H35 engine. I believe it was a 3.5 HP, 5/8” Horizontal Shaft, Float Bowl Carburetor, w/the Exhaust coming out of the carburetor...

Looking for decals, paint colors & codes and repop seat cover for a Fantic Broncco TX2 that I recently acquired. Any help would be appreciated! Jim

I was wondering if anybody out there has a PMR DB30 motor mount plate kicking around that they aren't using? :shrug: If not I'll get a new one but it will cost me $80 shipped, and OldMiniBikes Warehouse is out of stock at the moment. Thanks guys. :thumbsup:

Hi Fellas, please let me know if you have a kickstand or brake arm that look like these laying around. Thanks! :thumbsup:

Looking for a set of forks, preferably Taco. Let me know what you have

Hi I am looking for a Dyno 94ss cam for my 5hp Briggs & Stratton flathead. Thanks. :thumbsup:

Looking to buy some 6" mags for a mini project. Ideally looking for trail horse 5 spokes or kidney bean. Not interested in the tri spokes. Let me know what you have. Thanks, Ray

no junk or blown up parts... billet rod, flywheel, a nice cam, springs etc,,,

must be 3/4 keyed and for points... no junk please,,

I'm looking for a nice #35 kart chain for my mini bike build, don't want anything that will stretch a lot.

Please sum one help I need big cat plastic fenders