24mm mikuni carb and Stock briggs #2 casting carb

[franks]

24mm mikuni carb, Stock briggs #2 casting carb, Tillotson, intakes Clone+briggs

this is a minuni 24mm carb it came off a triumpth, it was a pair but i only needed one. Runs great.


$60

stock briggs #2 carb
$100

Tillotson 348B alky carb Great OPEN carb for a flathead or big clone\honda
$80

Tilly to briggs intake
$20

Tilly to Clone intake
$20

 

[rdog348]

Pictures please?

 

[franks]

ill post pictures as soon as my truck gets back with my camera card reader. should be 30-45min

 

[JamnJM]

What size and type of jets?

 

[franks]

What size and type of jets?

no clue. i can take the bowl off if needed

 

[franks]

the one that screws into the bottom is a 30

 

[JamnJM]

If that 30 is that bottom 10mm hex head....that would be the main jet and more like a 130.

 

[franks]

If that 30 is that bottom 10mm hex head....that would be the main jet and more like a 130.

the hex head is a drain, i opened it up and see something 30 but i cant see if it is a 1 or E or something like that. its just too small for me to see. the 30 is clear

they are super clean inside(like new)

 

[franks]

If that 30 is that bottom 10mm hex head....that would be the main jet and more like a 130.

its a 160, i didnt realize there was a jet attached to the drain(i hadnt ever pulled it out.)