Any idea what mikuni pilot jet this is

[Latent]

Any idea what mikuni pilot jet this is? It's a #60 pilot jet in a carb I ordered and I need a #30. Its from a vm26 genuine mikuni but im not sure if its a 26-606 or a 26-8074 mikuni and if that would make a difference. Apparently at tboltusa their genuine vm26 pilot jets won't be compatible with my carb. I don't want to make a mistake and order a 10$ piece of chinese brass by mistake... hopefully someone can help me out, very appreciated.



and if it helps here are pictures of the carb as well

 

[MB165]

is 60 stamped on it? i dont know about part numbers but that looks like a VM pilot. jet. I have tons of mikuni jets, if i find one ill pm ya.....
carb parts warehouse in ohio sells mikuni and kehin parts reasonably and the guy can practically tell ya the part numbers from memory

 

[Latent]

Yeah its stamped with 60, I just want to get the right part the first time around.

 

[FirePowerMinis]

VM22/210 is that type pilot

http://www.xjrider.com/gallery/albums/userpics/10002/mikuni_pilotjets.jpg

But, that carb is designed for 2-strokes, and are typically cheap knockoffs, hard to tune.

 

[Latent]

Have you used this carb in the past before?

 

[David wulf]

The 606 model I have is different from yours , mine came from tbolt . That jet you have fits a 26mm - 606 , cause it's the same as the pilot I have . Here's a pic of a real 606 .

 

[Latent]

The 606 model I have is different from yours , mine came from tbolt . That jet you have fits a 26mm - 606 , cause it's the same as the pilot I have . Here's a pic of a real 606 .

What are your main and idle jet #'s? How is the engine set up?