Bonanza BC1300 rear brake

[Steel]

As the title says, looking for a rear brake for a Bonanza BC1300.

 

[Steel]

Still looking for one. All I need is a rear drum brake that will mount to the existing mounting holes on a Bonanza BC1300 swingarm and has to be 4-1/2".

 

[Steel]

ttt

 

[middleoftheroad]

As the title says, looking for a rear brake for a Bonanza BC1300.

Have you tried here.

4.5" Brake w/ Steel Baking Plate, 5/8" Bore az2270s azusa 2270s

 

[88thunder]

While browsing ebay, came across this:
NOS 3-hole Minibike Drum Brake, Bonanza, Thomas, Manco | eBay

Maybe?

 

[george3]

While browsing ebay, came across this:
NOS 3-hole Minibike Drum Brake, Bonanza, Thomas, Manco | eBay

Maybe?

wont work.

 

[george3]

this must be the setup you need?

http://www.oldminibikes.com/forum/m...cle-ruppsters-vintage-bonanza-1300-build.html

 

[Dan-E-boy]

What about this one.. http://item.mobileweb.ebay.com/view...cmd=VIDESC&index=0&nav=SEARCH&nid=93809589966 I know you said all you need is the brake.. but for 26 bucks you get the whole package that bolts up to a bonanza wheel.. they also have a 60 tooth package available.

 

[The_Ruppster_86]

this must be the setup you need?

http://www.oldminibikes.com/forum/m...cle-ruppsters-vintage-bonanza-1300-build.html

That guy's bike looks damn good.:shifty: My set up was from Azusa but it will take some modification to work on the Bonanza as George 3 knows.

 

[prime mover]

I had the Azusa tri-star, sprocket and 4" brake on mine, it took a lot to work, I had to shave the arms off it and drill a hole in the backing plate. Now I have the 8" spinners with the 5" Azusa drum brake, it's fits better and stops GOOD.

I'm going to make a new bracket it's ugly and the stud it too small it clicks when you hit the brake. OldMiniBikes sells all the parts, the 5" sprocket fits like 3 different wheels.

 

[middleoftheroad]

As the title says, looking for a rear brake for a Bonanza BC1300.

Or this.
Rieken's Racing: Drum Brakes - OUT2WIN.COM

 

[rickinreno]

Still looking for one. All I need is a rear drum brake that will mount to the existing mounting holes on a Bonanza BC1300 swingarm and has to be 4-1/2".

Bonanza has ALWAYS used 5" brakes. They're always available on eBay


Sent from my iPhone using OldMiniBikes mobile app powered by Tapatalk