Champion rocker pedalstool

[Jrdragbike]

Who makes the pedistool that lifts up the rockers I've heard of it but who sells them, also who sells big bore honda blocks like the ones on mike clememts

 

[David wulf]

Do you mean the one they originally came with ? And i thought MDB was going set you up with a 3" motor .

 

[CarPlayLB]

I have a gas powered barstool, but not a PEDALstool...good luck with that search!:thumbsup:

 

[Stangrcr1]

Pedestal. :hammer:

 

[125ccCrazy]

I have a gas powered barstool, but not a PEDALstool...good luck with that search!:thumbsup:

 

[Camjamsdad]

Not bad 41 minutes before someone produced a pedalstool.

World class service

 

[David wulf]

You guys are just to damn funny :laugh::laugh::laugh::laugh:

 

[Newoldstock]

Use washers

 

[vwfan79]

Use washers

Yup that's what I do. As for a 3" block not sure anyone sells them most people get their block bored and sleeved.

 

[Prowler08]

NR racing sells a 2.815 block

 

[Jrdragbike]

Do you mean the one they originally came with ? And i thought MDB was going set you up with a 3" motor .

I was going to but it would have cost me more, I seen that mike clememts has them for 324$ including long rod and pidton

 

[Newoldstock]

Just so you know its very very very hard to keep them sealed up for long.

This is a kit from Burris.

Its a long rod and Burris 71mm piston for 180 bucks.
You need a block bored to use it.

At some point this would be a cost effective option for the hemi predator.

Burris also has some very good head gaskets.
You will need them.

 

[Jrdragbike]

How much can valve train geometry affect the performamce

 

[Newoldstock]

If something breaks because of it quite significantly

 

[Phil1958]

valve timing is pretty much important, check these out jrdrag:

http://www.crankshaftcoalition.com/wiki/Valve_train_geometry

Desmodromic valve - Wikipedia, the free encyclopedia (alternative to springs)

http://www.sbintl.com/tech_library/articles/rocker_arm_geometry_and_valvetrain_alignment.pdf

it would help if you had a good understanding of trig and geometry
when analyzing valve operation. :thumbsup:

just google what you are looking for!

 

[Camjamsdad]

I didn't need college cause I've got google.

I've been waiting for clarification on the champion rocker pedestal question? What is it you needed or were trying to ask?

 

[Jrdragbike]

I'm gonna end up using washers

 

[Coolcat70]

:thumbsup::thumbsup::thumbsup: triple thumbs to the pedalstool. I see my next build on the horizon!!