doodle sprocket adapter question

[iatemeself]

I have been using a random set of screws and nuts to hold the sprocket onto the adapter, but after riding around for 1 month the nuts became loose and flew off, Was wondering what kind of hardware should be used to secure the adapter plate and sprocket.... thxs!

 

[chazdaddy]

Hello iatemeself,

Nothing special, just check from time to time make sure tight. Seems like I am using 1/4 bolts and serrated flanged nuts to lock to the sprocket. Can use nyloc nuts too. Still should check to make sure tight after doing a lot of riding.

I am used to checking stuff from kart racing. Pretty much anything will come loose and fall off, so have to check, double check or will lose something. :thumbsup:

http://ts1.mm.bing.net/images/thumbnail.aspx?q=5028496874012740&id=1895f9e36b752dd26369d3ff037f9181

http://ts2.mm.bing.net/images/thumbnail.aspx?q=4647481729024065&id=ed1e8914b66c54b387a408a448b3d219

I like serrated flanged nuts better, easier to work with, but nyloc works well too.