jetting a 24mm mikini

[No Money]

I hav a 212cc predator with

14cc mill and ported
billet long rod
billet flywheel
308 cam
beefy rocker
26 pound springs

24mm mikini flat slide carb main jet 130 and 15

I just got a 135,140.... 17.5 -20 and 22.5

what combo should I use

 

[MB165]

have you fired it up and if so how does it sound? any plug readings??

 

[David wulf]

The 130 - 15 is that what came in it ? I would try it first and see how it runs . I have a set up that is close but i'am using a black mamba cam and a 22mm with 130 - 15 jets . And i just put a new 24 mm flat slide from NR racing on my brothers GX200 honda limited mod and it worked prefect out of the box and i thing it came with 140 - 20 combo .

 

[No Money]

yea fired it up when riding it bogs then stop then bogs it sound good as hek... any plug readings ? I hav no idea....... 130 -15 is what it came with
I hav to get that rpm reader thing......

 

[David wulf]

No money i would start with the piolet jet first try the 17.5 and see . Also check the position of the clip , middle is good starting point . And the main is the last part of the RPM range .

 

[No Money]

the 140- 20 combo workz great...... cant wait till I get a tech to see how many RMP I hav
ty David wulf