Just rebuilt carb and not getting gas into the bowl "Pic"

[jon321]

Its weird Im getting fuel up to the petcock valve but not inside the bowl. When I separate the bowl from the other half of the carb with the fuel lines still attached I can get fuel coming out of that hole when I open the valve , but once I put the bowl back on ,no fuel is present in bowl. I ruled out the gasket in case it might of been blocking that hole but its not

 

[manchester1]

What is that carburator from?? Clone??

 

[jon321]

Its off my 1970 CT-H its a Keihin carb,

 

[jimh]

I'm pretty sure fuel goes up throught that hole,into the body, through a passage to the float needle seat area,then back down into the bowl. The problem is likely in the passage.:thumbsup:

 

[KustomKartKid]

clogged vent.??..fuel can't come in if the air can't get out.....

 

[jon321]

Found the problem it turned out to be the float valve assembly that I bought in a kit from DRATV. I bought his NOW_EVEN BETTER CARB_KIT which wasnt better,lol. I had to reuse my old valve assembly and it fired right up .Anyway its runnin now,