Hey everyone I got a tilly hl 334 ab on my flathead briggs, I'm having some trouble tuning. As I'm coming out of a turn at slower speed and hit full throttle it pops and dies but when I let off the gas it starts to go again. Any suggestions what I should do? I'm running gas, pop off is at 10 pounds and fulcrum height is at .75.
tuning tips
On the tilly 334 you dont mention where the high and low needles are set the top one being the H mixture at top end the lower is idle we start at 1 1/2 turns on both....mixture try running a real rich idle mixture sounds like its lean get it to idle and not pop then try adjusting the hi speeed top get while at speed
On the tilly 334 you dont mention where the high and low needles are set the top one being the H mixture at top end the lower is idle we start at 1 1/2 turns on both....mixture try running a real rich idle mixture sounds like its lean get it to idle and not pop then try adjusting the hi speeed top get while at speed