Yardman Snowblower parts

[oldcarcbx]

Yardman Snowblower parts WANTED

This is not minbike, but somewhat small engine related.

I need the following parts for a yardman snowblower model number 70810-1 circa 1971.

Belt guard cover 3639-57-69 -covers the drive belts at the rear of machine

Universal joint assembly 22222-69 -connects chute control rod to chute control

Master clutch control handle - 40320-41 two sided plastic handle on either side of metal lever

Let me know if have any of these parts left over from machines which donated their engines to minibikes.

There is currently a picture of a similar machine called a yardman snow bird on Ebay for reference

 

[oldcarcbx]

Bump -still looking:shrug:

 

[jeep2003]

do you have pictures of the parts?

 

[oldcarcbx]

SNOW BIRD S-262 ? BELT COVER - BELT GUARD ? *FREE SHIP* SNOW BIRD | eBay

This a link to a pic of the belt cover

 

[MB165]

would a 1/4" swivel from a toolset work for the U-joint?

 

[jeep2003]

i dont have that cover or handle but im sure i have some snowblower u-joints. Ill try and remember to dig them out tomorrow

 

[oldcarcbx]

Thanks everyone for your responses.

Lemme know what you can figure out.

Regarding the u-joint it has a rubber connection instead of a metal pivot. Either will work or i will make it work.

 

[dw1973]

I might part this one out. Located in 49235.

 

[oldcarcbx]

DW ,
That is the one ; the belt cover, the "t" handle are the same. The u-joint on mine is a thick rubber hose(rag joint), but it was probably superceded by the metal u joint. PM me with details.