calling

I purchased the 2001B TC kit from them. I was so excited to get it installed, that I didn't pay real close attention to the alignment of the pulleys. Last night I noticed they were far from perfect, so I sat down to make it better. Upon getting them perfectly aligned by removing a washer on...

This guy built a walking chariot that's powered by a 20-volt cordless drill | Fox News I saw this at lunch today at work and immediately thought of Jeep2003 and his creativeness. I know it's not a mini bike, but still cool as hell. What do YOU think?

Has anyone on here had any luck calling the service number,constant busy signal.I want to get the stickers for the recoil replaced after it has been repainted,for a build I'm doing. Would anyone on here have new ones or a different number to call? Thanks.

Hi recently got my hands on this mini bike, it has spent many a year covered up in a barn in west wales. Unfortunatelly time has taken its toll on it and i am as the new owner going to restore it. What i would like to know is what make and model is it and a rough year of manufacture is possible...

I ran into a confusing problem basically my HL360 tilly makes my modded gx200 smoke but not black smoke.. WHITE SMOKE! And oil seeps out the spark plug hole I thought it was the piston and rings but it wasn't I tested out a round slide type 27mm mikuni carb and the white smoke stopped.. I would...

Hey Ed.... I was walkin' thru the store tonight,,,,saw this shirt and figured it was an EE shirt. I walked back to double check and realized some duck huntin' dude robbed your image....and to make things worse he's using your image to get the chicks !!!

Ok, so I am in gr.12 this year, next fall I start my training to become a machinist. I've always wanted to build a drag bike, but I have put it off because I wanted to have a few nice riders first, and becasue so far my job is cutting grass so I don't have a great paycheck coming in, but this...

After seeing all the fun they have at events like Windber I was thinking that maybe us Canucks could try to do something on the smaller scale that is closer to home. I wanted to make it to Windber this year but it won't be happening. So if any of you Canadian guys want to start something...

I am thinking of building a drag bike this summer. I have no experience building a race motor what so ever. I can work on clones but I don't know what speed parts to put together to give me a good engine. I only want to do 75-80mph. What parts put together will give me a motor that will run...

I need to take a 7hp Kohler K181 to a machine/engine shop to have what looks like a snapped off bit extractor removed from a block and then redrilled and tapped. Do you guys know of any shops north of Hartford that are good and could handle this job? i need this done so i van finish this motor...

Hi, I have a hacked up 1972 Moto Skeeter. I was looking for the owners of a bike similar to mine so maybe I can see some pics, and maybe see if someone knows where I can find a few parts. The Moto Skeeter was my dad's when he was a kid so I figured I would fix it up as a winter project so he...

ok i just ordered this motor to build my mini bike around i want this MB to have the looks of several classics, so stay tuned as i build this bike im going to try to post video instead of pics, today when i get to the shop im going to build my handle bars

..ok here's the deal. On the "WOW" RUPP Continental survivor bike...orig. 3-1/2 hp Tec...often times when I try to start it feels like it's got 14:1 compression...if you pull the cord slowly and get it around to where the exhast stroke is beginning you can give it a good pull and it fires right...

I am looking into buying a welding kit. I am a dude of 17 with no previous welding experience. i dont have alot of money, so help me out with nailing down a cheap (no too cheap) 'begginer' kit. the purpose i am going to put it too would be putting together a frame from scratch. so your imput on...

Ok, first and foremost, I have a HUGE flooding issue with the carb. I turn on the petcock and try to fire up the engine....gas literally dribbles out in a steady stream from the venturi. Motor will start but then dies out immediately from being so rich. The minute I turn off the petcock...

Howdy! To plan for a Lone-Star Minibike Reunion, I need to know where majority of us are located, so just post where in Texas you are from and we can get the ball rolling on an awesome swapmeet/reunion/race!!! BTW I am located in Northeast Houston.

i need a intake for a 3hp tec carb to fit on my 3hp B&S. i would use the original tec intake but when its mounted on the B&S its tilted to the side a bit. so i was wondering if any member on here would like to help me out. i have some stainless tube and i can get 2 SS washers for either end, all...

Don't you hate it when the Crabby neighbors around you always have to ruin the fun. I was out riding today just around the block a few times. I was obeying traffic laws, and wasn't rookie racing around, had a helmet on and was being nice to other vehicles driving. Yet still someone has to call...

Well my buddy owns 12 acres and we built a track out there. Its not the best track but alot of fun! If anyone who wants to ride wants to come and camp this saturday june 6th pm me and i will let you know exactly where we will be. Its right by the turnpike and there is lots of room to...

Looking for pics & advise on the design & construction of a new chain-guard. Also interested in how most of you are adjusting & controlling the excess chain length? Thanks ~JM~