carbs

Has anyone any experience with profane carb convertions for small engines or deditcated Profane carbs? Been giving this some thought since my father borugh up a kit he saw for an outbard motor running from a small screw in type cylinder. The octane rating of the fuel is high. The fuel is...

ok noob moment AGAIN..lol how do people run dual carbs, is the intake custom built or can you buy it somewhere ? Mostly seen them on west bend engines with tillotson carbs Thanks

What Newer or ? Carbs will Fit a Fuji GO Devil Engine? Or have a carb/air cleaner setup for sale? Any help appreciated ! Thank You !:thumbsup:

I have seen old pictures of Briggs & Tecs with dual carbs, perhaps for show but Has any one tried Dual Carbs on a clone? (This is what day dreaming at Work gets you)

I picked these 2 Mikuni carbs up Saturday. One came off from an old Yamaha dirt bike (unknown cc). The other is freakishly huge and I have no idea what it would fit. Both seem to be complete, and slide very nicely. I cleaned the exterior of them but that's it. I dont know too much about these...

I have 2 later model 3.5 engines with on tank carb one is on a bike I'm trying to get running, between the 2 carbs I might need to replace them both, one sat with water and is really jacked and won't idle. The other one idles ok but stubbles real bad on take off, I'd like either a place to get...

Time to clear out some things..... All items in Oregon. 3hp tank(yellow one)....no rust inside... $15 +Shipping 3hp tank w/carb. Some rust inside. $25 + Shipping 5hp tank w/carb(choke is stuck). Some rust inside. $25 + Shipping

Quick question. Will a 3.25 adjustable carb fit a 3.5 engine? I have a good lead on a old edger with advertised 3.25. It has a adjustable carb on it. Are they interchangeable? Thanks.

Trying to get my Lawn mower running and have no vacuum coming out of the fuel pump in the line going back to the tank. I have 5" of vacuum from line coming from the crank case and then going into the bottom port of the fuel pump. I'm assuming 5" is enough from the crankcase but don't know...

Bought these for a couple projects and never ended up using them. First one is a Tilly 304WX, nice condition, filter adapter and throttle adapter.....$70 plus shipping Send one is a Tilly HL339, OK condition, includes intake manifold for a 5hp Briggs flathead, air filter adapter and air...

I have 2 alky raptor carbs i have never used. I got them with a lot of stuff i bought from a guy that was getting out of karting. They are #5 castings. One has "finish line" engraved on it. The tank has no rust, Paint is crappy. I have never run these carbs. Both carbs and the tank are yours for...

I have alot of tillotson carbs for sale, mostly alky but a couple gas. all have been completely gone thru, cleaned, new complete kits, new stainless bolts, with air filter adapter (velocity stack. carbs look brand new. $85-$125 depending on carb and model. let me know what your looking for. Dustin

HL-357B, blueprinted by E.C., no choke, custom fuel cap by Atsownz. I'm asking $70 [open to offers], the fuel cap cost me $24+$6 shipping alone. Carb is on the right. Carb is on the left. Bore Carb is on the right Briggs 5hp Flathead "Funpower" Carb I'm asking $20 OBO ARC 4.500" Long...

All carbs listed have just been completely taken apart, cleaned, rebuilt, fulcrum arm set, pop off set, all new stainless allen head bolts/screws, and all come with filter adapter with filled in and blended screw holes. All very nice carbs, ready to bolt on and run. They have had NO fuel through...

Can anyone tell me if there is any rhyme or reason to the tillotson carb numbering? The Walbro (WD-36) I have for my Trisport seems difficult to get parts for. Locating another carb is an option. They also used Tillotsons, 3 possible from paperwork I have, HRM-6A, HD-80A and HR-157A. Is there...

same carbs but 1 flys the other is a bone. today i switched carbs to a brand new re jeted for my stripped jet carb {old post}the new one is slow. no puck up and low top end i got a new carb ,put it on and it is so slow.>>> why same carb, same jet size one brand new {slow} the older one 10...

how do the diaphram carbs work in comparison to the float bowl carbs on the smaller tecumsehs

I had previously bought two of these and have one on a briggs 5hp and one on a 3hp, I was easily able to adjust it for the 3hp. I'll be making a custom throttle plate for all of em given that's the only thing lacking. These have been on an engine for a very short time, they are missing idle...

Sooo I dig out my Tilly manuals and a milk crate fully of Tillys, mostly HL carbs I've saved for Briggs motors to see what's going on here.. :hammer: I've tried a couple but they lacked the fuel delivery for a 5 horse flat head without having to mess around with mods and stuff... SO I quickly...