center

My friend bought this for me Saturday at a recycling center for $20...lol. Enjoy I know I will. :biggrin:

need the center stand for a MTD/Columbia Trail Flight. will buy or i have tons of stuff to trade

i need just the center pot metal piece for a tubine wheel. (not the outer shiney chrome rims) it needs to have the fins on the one side and the holes on the other to attach a sprocket to. the reason i need a new one is because i stripped the threads on my wheel when trying to put the sprocket on.

All of a sudden my OldMiniBikes screen layout has changed. The main forum and sub forum listing is all on the left side of the screen. When I click on a subforum, all of the threads are now in the center of the screen, just yesterday they were on the left too. Make it stop.

I am in the process of repairing the recoil on a tec h35 and the center screw is broke off in the hole and I need to find a replacement as well as a tap to chase the threads after I drill the old screw out. Does anybody have experience with this??

Wanting to dress up my wheels for the Thunderbird and found something at wally world (vegetable steamer basket ) that looked pretty cool. I need to paint the rims silver and permanently mount the caps. Just trying something different.

https://www.surpluscenter.com/ Im gonna start this thread for helpfull stuff they sell. Anyone can ad to it for stuff from there site and ad any helpfull tips about the products.

So I'm trying to set the valve lash on my 6.5 Honda clone. How do I determin TDC on the compression stroke? I used a flash light and watched the piston till it was at the top. But I'm not sure weather it's the compression stoke or not.

I'm finally getting ready to complete my BC1500 SH and am in need of center mount footpegs. I forgot the pegs that were on it when I bought it were some kind of cheesy-bent-to-fit-pipe. Definitely not stock. The mounts appear to accept a 3/4" diameter peg. Can anyone give me the factory...

From a RUPP Roadster, Scrambler, etc....this one is in pretty darn good shape :thumbsup: most of them are rusted. Just a couple little spots of peppering on the edge that doesn't show when assembled. Includes the short bearing hub that goes inside the brake hub.... $25 shipped

Came off an H60, I'm sure it fits other big blocks. Real good shape. $20 plus shipping (will not fit in a flat rate box, fyi.) I never knew this but this looks like a direct fit also on my Briggs flat head. Anyone with a briggs and a lot of room in their frame looking for longer run...

when i bought my bird back in 08 in pawtucket r.i. the guy showed me this set up he had. im assuming its the same guy, he goes by the name munchkin. hes a cool guy, and had all sorts of stuff, go kart and all sorts of other stuff. briggs a stratton 3 1/2 hp learning center

Looking for a 1" center to center brake caliper. These were commonly used on Lil Indians and some Speedway bikes. MUST be in good condition and operable. PM me.

I'm looking for a new or VERY nice pair of shocks, chrome springs with preferably silver or chrome body.... I have a new pair of chrome shocks with a 9 3/4 ctc spacing to offer in trade or I will just buy them out right.... I know they have them on ebay but I thought I'd check here first and...

I'm looking for a good hub for a 30 series, I just picked up a driver last weekend and afterwards noticed the hub is worn really bad, the people must have ran it dry a long time.. The part I need is part #5 (circled) I could also use the bushing (part #8) PM me if you have a spare parts..

I put the Honda flywheel on my 6.5 hp clone today and quickly realized that the coil pickup was not centered in the magnets. Is this common and can I shim the pickup to get it centered? I also tried relentlessly to set the air gap to .020 as recommended. However, the readings between the upper...

what could go wroung if the valve lash is not set when at top dead center

greetings to all- I found an orange framed minibike w/no identifying markings on it at a local lawn mower shop. the guy knew nothing about it as to make/model etc. it has a 5 hp B/S motor, a foot brake and a center stand. Any ideas? thanks!

had a problem with too much compression after installing new springs/head. i checked the lash gap which looked okay but wasn't fully cycling the piston to recheck. right now i'm eyeballing tdc but when you guys start doing more and more mods can you get away with doing it this way with just...