filter

I purchased a aftermaket air filter for my 6.5 hp honda clone the guy at the mini bike store said it will give you more power enough to ware you can notice it, Can some one tell me if it can or if it cant i need more opinions. Thank you

briggs filter adapter for flowjet $15 shipped :thumbsup:

I 've got these Honda, Clone, Predator parts for sale came off a racing go kart, top plate, clutch/chain guard, K&N style filter, Air Filter adapter, new fuel pump , 6ft neon orange hose (new) and a remote mount gas tank (mini bike) $40.00 for all or could part out. Plus actual shipping.

Just got finished up building my Trike mini bike. I modified a Baja heat into a trike. It has a HF 301cc predator engine with a torque convertor. It has a new pipe and air filter. I made the seat myself through some go kart slicks on the rear axle.

Hey everyone. I just installed a new upgraded air filter from OldMiniBikes,GX200/Clone Air Filter Kit The problem is, the gas overflows into the filter from the carb. What is the problem, and how do I fix it?

Started on the black widow. Everything was good until I opened the carb. Need the top part of the carb where the filter is located. The filter slides over the threads and a cap holds everything in place. The threads are gone ugh. Rest of the carb looked ok. Thanks dave

I'm using the carb listed above and I was wondering what options I have as far as filter adapters. I want to run a uni foam filter. Any help is appreciated.

I will get a pic later in the day-absolutely mint NOS housing & filter for show bike. Foam on filter is deteriorating but can be easily replaced with new. no dissapointments $100 shipped

I just installed the new ARC Billet Flywheel and thought I would share a small idea I had. I wrote the coil gap on the coil for future reference. Also notice how I slide the air filter rubber past the mount and then clamped it down, it now has no way of slipping off if hit while off road. Cause...

I need an air filter for the 8hp Tecumseh in my Super Bronc. The actual Tecumseh part number is 33269A. Hopefully my pic will show up. Let me know what you have. Thanks, Jerry...

Two air filter housings. One white other looks to be primer green. $20 each shipped.

When I ordered the angled air filter kit for the predator 212, I thought it would clear the frame. Well once I tried mounting the filter to the adapter it was apparent that it would be that easy. It's on slightly crooked and does touch the frame fairly well. Could I make-shift a cold air intake...

I built a drag bike from a nitro 44 frame. The motor is a predator 212 that I rebuilt. - DJ-114X ARC top plate/throttle hookup - 6934 ARC billet air filter adaptor - DJ-1257 Choke hold - Fuel Pump - 6877 Pulse inlet fitting - 6899 Angled air filter - 5' fuel hose - DJ-1420 Chain...

Thinning the herd! Custom built 1968 Taco 99 Trail Tamer full suspension minibike with race modified Briggs 5hp engine. One of a kind auto restoration quality restomod by OldMiniBikes member Havasu Dave, I bought it this last summer and rode it just 5 times. Loud n Proud this one. Pretty close to show...

$45 plus shipping, filter is now painted copper and clear coated,,

Looking for an old tecumseh chrome air filter cover for my blue ruppenstien.

This is probably a very basic question. I have the predator 212 and looking to change the factory intake and exhaust. I want to get a UNI air filter this is the link below. affordablegokarts: Air Filter, UNI Dual Layer But what adapter do I need? It gives me a bunch of different...

Could just changing from the stock filter to a cone style filter cause my predator engine to take several pulls to start? Maybe I need a bigger emulsion tube /jet?

I ordered an inline fuel filter to use on my Greyhound 6.5, my question is will the heat from the engine cause it to melt if I place it in the cramped space right next to the engine in between the fuel tank and carburetor?

Looking for a bolt on exhaust/header and air filter for a predator engine, nothing to expensive but something nice. Please lmk what you have available - thank you