filter

Hello all. I picked up a new 212cc Predator engine recently to run in an old Mini Bike of mine. I can ride it for about 5-8 Minutes with a lot of power, But after that It loses a lot of power. It seems when the engine gets Hot. I put new Oil, New gas, Its a new engine, New clutch, Air...

What's up fellas, I have me a CT200 ordered and tracking showed it shipped today, curious if any of you guys know if this has the 200 Honda clone motor? I've been looking on OldMiniBikes Warehouse's site and hoping to get the jet kit with intake and a filter, hoping to find a UNI foam filter that will...

Looking for this Tecumseh air filter backing plate part # 30673 or # 30603. One version is offset, the other has straight mounting holes. I have a couple vented covers that work with this back plate. So, if you've got a extra back plate, I've got a cover for you.

I'm new to small engines and have been rebuilding a go kart from ground up and put a predator 212 hemi in it and bought the stage one upgrade kit, I want to put the performance air filter kit on it but don't know how to route the house coming out of the top of the fuel tank since it attached to...

Any suggestions on what size jet to use for a stock car with the header and aftermarket filter? Thanks

Hi Guys, New to the forum. I just installed a Predator 212 on my race kart with a 15* motor mount. The reason why I went with the 15* mount is because of wheel clearance with the air filter. With the mount and aftermarket filter, I now have the clearance I need. Only thing is I am now...

So after the first "quick" mini bike outing of the year with my son here's the totals: One lost chrome exhaust tip, & inner baffle (thank good the pipe only got loose and stayed on, man those parts seem tough to find in chrome) i'm going to back track again and see if I can't find those...

This is the inside of an old tank the day I opened it. It's almost mesmerizing in its digusting, dried vomit-like crud. So I did the ol' shake with bolts and gas a few times and it looks like this now. Whats left looks kinda deep no? I'm sure the rust will come out if I keep...

Rebuilt - New air cleaner & filter - all linkage is there too - Clean gas tank - $35.00 + $5.00 shipping

I'm looking for a aluminum air filter adapter (aftermarket) for a Briggs 5hp flathead. New or used as long as its in good condition.

So i have a non hemi predator with a cnc air filter adapter, k&n filter, autolite plug, straight pipe header, jet kit and 140 e tube and a hilliard extreme duty clutch, i also just picked up a hemi predator with a max torque clutch. Question is will the hemi make more power if i swapped...

First - My parts kit is complete. I'm going to be doing some cleaning and painting and then I'll be ready to put it all together. I just wanted some opinions/ideas from some guys with more experence than me on the setup before I assemble it all. It's a GX200 I got off eBay. I honed the cylinder...

Just purchased a Predator 212cc Hemi for use in my mini bike but had to remove air filter for frame clearance. Will replace stock air filter with aftermarket filter and adapter but not sure what needs to be done as far as rejetting. Engine is completely stock. Any experiences? Any help? Thank...

Hi everyone I'm new to mini bikes and want to build a 60 mph motovox to race vs dirtbikes 85cc to 250cc. I own many dirtbikes and do all my own mechanical work, so building isn't an issue. Here's my plan so far.. Let me know how realalistic or unrealalistic it is. •billet rod / fly wheel •hemi...

I got this motor in a trade a few months ago. Doubt I'll ever use it. The following is what has been done to the motor..... New hemi predator. Never started. Has been disassembled, clearances checked. Big end of rod opened up to .002+ oil clearance. Governor removed, low oil level sensor...

Anybody out there got a good recipe for a "generic" air filter oil spray or is it best to buy the kind in the can ?

What's up guys, first actual mini-bike. My bike is about a week old and of course I'm increasing speed one small easy step at a time. Currently set up as 5" sawtooth tires fr/r. 12t front, 60t rear. Completely stock engine, zip tie on gov to get a few more rpms. So far I have GPS'd the bike...

I picked this up a while back but ended up buying an NOS, so won't be using it on my 1970 Rupp project. The inside is really clean, but it could use a new diaphragm/gasket. The breather housing needs a paintjob, but it is in really good condition, and the filter screen is in tact. Has an intake...

I put some aftermarket parts in to my 6.5 honda clone motor. Comment on what els you think i should do to the motor Exhaust Before:stock greyhound exhaust Now: aftermarket custom header Air filter Before: stock greyhound air filter Now...

Aftermaket air filter for my 6.5 hp honda clone