heathkit

Anyone got a nice, big, clear digital file of this ad? Need the Boonie for a T-shirt were doing but my copy is too pixellated according to the print shop. Any help would be appreciated! Thanks, Fast Eddie

I'm looking for the 3 springs and 3 ball bearings that go in the large low gear sprocket for the 2 speed transmission. I also need the large spring that goes in the high gear sprocket assembly.

I saw that someone on this site was making seat covers for Boonies. Does anyone remember who was making them? This should be the last part I need to finish this project. I'll post pictures once completed. Thanks

Looking. For a heathkit Boonie seat have cash or trade thanks

:shrug:

In the process of buildin me a boonie i realized the narrow skinny forks had to go so this what i came up with all brand new parts $200 plus shipping

Not sure what all they cam on. I know the Boobie Bikes used speaker lights.. The bezel has some scuffs and dings.. Not as perfect as the pic shows, but not too bad.. No rust.. a couple small waves in the canister, but I'll fix that.. It's 12 volt right now, but can be 6 if you'd rather...

I dont know where to post this,so here goes. This is the hilltopper stolen out of my storage shed,around thanksgiving weekend. I am posting these pics hoping the theiving bastards will try to look up what they stole. There is a 1000.00 dollar reward leading to me kicking the everloving...

Super straight forks wheels and tires $200 o.b.o p.m for pics

Hi Everyone! I've been lurking in the shadows here for months. I didn't want to post my project until it was completed. About 17 years ago a close friend gave me a running Boonie Bike that he himself had built from the kit in 1969, complete with the check off assembly manual. I played with...

Lookin for a front fender for a boonie i just picked up

I'm new to this forum. I just picked up what appears to be a very original Boonie Bike. It runs and rides great. It has a two speed shifter. But something is obviously missing. The shift cable is just laying down there by the drive sprockets. Does anyone out there no what parts I need to get...

I need the two spacers used to mount the front fender on the Hilltopper.

Hers it is Another got plans for : 10 hp ape hangers str pipe

Heathkit Boonie with new clutch and like new 8hp Tec engine. Good tires. No rip's in the seat. Needs for a better engine set up and throttle set up. $325 as is. Pick up at MacFest or FunDay#3 Bullhead

Sadly its time to part with a couple of my bikes. This Boonie Bike is all original, from the seat (which has just a little yellowing in the welting) to the two speed shifter. It's a beautiful looking and perfect running bike. Even includes the front ski option. If you'd like to use U-Ship, I...

One for the Freak-Bike section perhaps....

Two weeks ago I purchased from a young man a Heathkit Hilltopper roller and three engines. A B&S 3.5 HP,a B&S 8 HP and a Tecumseh 5 HP racing engine. The 8 HP works well now. The other engines are Southwest wore out. Sand and grit has destroyed the bores and rings. one has a shattered...

The gas tank is a two piece,welded plastic tank. The seam where the two halves meet has a white plastic trim strip that goes around the tank. anyone have a source for this trim or found a suitable substitute?

I have a heath kit boonies bike and I need to know if there is any aftermarket scrub sprocket and drum breaks avalable for it. I do know the drum breaks don't work so well but its more for looks then anything else any help or advice on this matter will be greatly appreciated ideally something...